Nuclear Waste Career Careers in the United States

We have partnered with CareerBuilder to bring you the latest job postings for nuclear waste careers. You can keep tabs on the latest CareerBuilder nuclear waste careers by subscribing to our RSS feed for this page.

Career Listings

Technician I, Nuclear Pharmacy (early mornings between 2:00 am - 10:30 am)

Cardinal JOB TITLE: Technician I, Nuclear Pharmacy At Cardinal Health, we're developing the innovative products and services that make healthcare safer and more productive. Join a growing, global company genuinely committed to making a difference for our customers and communities. Cardinal Health's pharmaceutical segment operates the world's largest network of nuclear pharmacies and is expanding its positron emission tomography (PET) agent manufacturing capabilities. For over a quarter of a century, the Nuclear Pharmacy Services business of Cardinal Health has set the standard for the radiopharmaceutical industry. This business is responsible for manufacturing, dispensing and delivering products that aid in the early diagnosis and treatment of disease. Nuclear Pharmacy Services, whose network of over 150 pharmacies fills 65% of radiopharmaceutical unit doses nationwide, has consistently demonstrated leadership through innovation and a commitment to excellence. Because of this commitment, our customers and their patients benefit from the latest, safest, most efficient methods of dispensing radiopharmaceuticals. Track/Level: O1 Business Segment: Pharmaceutical Segment Business Unit: Nuclear Pharmacy Services Business Department: Operations Job Function: Pharmacy Operations Job Family: Nuclear Pharmacy What Nuclear Pharmacy contributes to Cardinal Health Nuclear Pharmacy is responsible for providing radiopharmaceuticals and other drugs to medical care providers under highly regulated State and Federal guidelines; may also consult with or advise physicians and nuclear medicine technologists on the safe and efficacious use of radioactive drugs for diagnosis and therapy What is expected of you for success in your role Demonstrates basic knowledge of radiopharmaceutical compounding and dispensing procedures Follows basic radiation safety principles as outlined in the corporate radiation safety manual Follows established guidelines for the dispensing of routine prescription orders, under the direct supervision of a registered pharmacist Follows established guidelines for delivery routing Assists in non-dispensing activities Follows established guidelines for the operation of survey meters, dose calibrators and wipe test analyzers, under direct supervision...

Nuclear Medicine Technologist per diem SJ (31219)

Job Summary: This job is responsible for handling radioactive materials and operating radionuclide measuring and imaging devices for the purpose of obtaining diagnostic information concerning various bodily functions and structures. Work is conducted under strict safety standards and in accordance with department protocols and regulatory/license requirements. Essential Duties: Operates and maintains quality control for all imaging equipment and radioactivity assaying devices in the Nuclear Medicine Department; calibrates cameras and equipment in accordance with internal protocols; verifies proper operation of equipment prior to use; checks radiation-monitoring devices and advises appropriate parties if problems are identified. Prepares radio-pharmaceuticals for patient use, administers radio-pharmaceuticals to patients and performs nuclear medicine procedures; uses appropriate camera in accordance with internal protocols; ensures that sufficient supplies are on hand to perform procedures; follows safeguards and protocols to ensure quality of results. Operates nuclear medicine computers to enhance the diagnostic value of information obtained from nuclear medicine procedures; follows internal protocols when processing computer studies to achieve high quality films by choice of filters, slice selection, display parameters, image intensity and labeling techniques. Maintains records and logs as required by department protocols and licensure requirements; logs patient dose administered, progress notes and other pertinent data. Disposes of and stores radioactive materials as required by law; stores radioactive materials/waste in appropriately labeled and shielded containers; removes radioactive and waste materials from exam rooms to proper storage or disposal location; surveys waste leaving the ?hot? lab for radiation levels in excess of established standards. Schedules patients for nuclear medicine examinations, questions patients and/or reviews patient charts for facts of patient history which are pertinent to interpretation of nuclear medicine examinations by the radiologist. Recognizes that continuing education is vital to maintaining and advancing the profession; keeps nuclear medicine skills current, demonstrating evidence of continuing education to include department meetings, individualized learning opportunities and related classes. Performs related duties as required....

Nuclear Criticality Safety Specialist

Talascend is currently seeking a Nuclear Criticality Safety Specialist for a contract opportunity located in Richland, Washington. PRIMARY RESPONSIBILITIES: Perform alternatives evaluations, safety evaluations, criticality safety calculations and various accident analyses that support the design, construction and operation of liquid waste processing systems and facilities. Provide technical assistance to other nuclear safety personnel and will interact with project functions, the customer, and regulatory agency personnel in the resolution of complex regulatory issues. Ensure the work products are maintained utilizing DOE specific Orders, Standards, and Guidelines applicable to nuclear facilities. Provide assistance to project and construction management in identifying and complying with project nuclear safety requirements and in addressing issues as they arise during project execution....

Nuclear Medicine Technologist - Per Diem Floater

Nuclear Medicine Technologist - Per Diem Floater Job Description: Quality Temp Staffing, the leader in healthcare staffing since 1988, is currently seeking a Per Diem Nuclear Medicine Technologist, preferably with one (1) or more years experience working with Phillips Cardio MD, ADAQ & Siemens E-Cam. Must have the ability to work in a variety of locations within Greater Los Angeles , Ventura and including Antelope Valley. Duties: Registers patients by confirming patient identification; reviewing consultation requests; checking for special instructions; consulting with the radiologist; entering anticipated services to patient log. Comforts patients and their families by answering questions; responding to requests; explaining procedure and nuclear medicine equipment. Treats patients by performing imaging and flow study procedures; operating radioscopic equipment to conduct tests; preparing and dispensing radiopharmaceuticals. Monitors patients during treatment by maintaining vital sign records; recognizing emergency patient conditions; initiating life-saving first aid; performing x-ray fluoresence scanning. Prepares reports by collecting, inputting, and retrieving study data on radiology management system. Maintains nuclear medicine equipment and supplies by cleaning equipment; troubleshooting problems; performing preventive maintenance; arranging for repairs; maintaining supply inventory levels; completing and placing supply requisitions; restocking supply storeroom Maintains quality results by following, and enforcing radiation safety standards. Updates job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations. A dditional Duties: Provides information to help Physicians diagnose patient illnesses Gains patient cooperation Prepares patient for procedure Minimizes radiation to patient and staff Complies with federal, state, and local legal and professional requirements...

Solid Waste Engineering and Construction Technician (CQA Tech)

Terracon is a 100 percent employee-owned consulting engineering firm providing quality services to clients. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in: Environmental, Facilities, Geotechnical, and Engineering Services. Over its history, Terracon has achieved significant expansion through both internal growth and acquisitions. Terracon currently has more than 3,000 employees in 140 offices and 39 states nationwide. Terracon?s growth is due to dedicated employee owners who are responsive to clients, provide quality services, and take advantage of opportunities in the marketplace. By combining our national resources with specific local area expertise, we consistently overcome obstacles and deliver the results our clients expect. General Responsibilities: As a Construction Quality Assurance (CQA) Technician with Terracon you will, under supervision of a project engineer or project manager, work on solid waste engineering and construction projects and perform field and office tasks. Position will require overnight and extended travel depending on project location. Essential Functions and Duties: CQA training and direction of lower level solid waste project technicians. Soils ? performs all field tests as required by project specifications, including nuclear gauge moisture/density testing, procurement of laboratory soil samples. Familiarity with laboratory soil testing standards, tests and procedures and their relevance to CQA field testing. Perform observation of conditions for subgrades, compacted clay liners and other soil components. Geosynthetics ? performs all field tests, records and sampling procedures for landfill or related applied geosynthetics, in accordance with applicable CQA plans and regulations. Accumulation of daily records from CQA projects to identify failures that may need to be addressed and make sure that all testing and reporting is being completed. Familiar with Terracon CQA policies, project specific technical requirements and governing solid waste regulations. Using or creating a project manual for technicians to take to the field with adequate diagrams, instructions, sampling frequency and checklists. Support to engineers or project managers for compilation of CQA reports, including certificates, etc. required by the project. Support for entry of field data onto computer forms and cross-checking results. Safety Responsibilities: Complete safety orientation program Abide by safety and personal protective equipment policies Demonstrate safe work practices and avoid unsafe behaviors Drive defensively, avoid preventable accidents and always wear a seat belt Attend regularly scheduled safety training Report all unsafe conditions to your Supervisor Essential Skills/Abilities: ? Teamwork oriented ? Planning and organization skills. ? Flexible and versatile. ? Continuous learner. ? Self-Manager in regards to prioritization of projects and tasks. ? Assist in maintaining equipment. ? Familiar with MS Office and Excel. Education/Experience: High school diploma plus at least five (5) years Technical Experience. Knowledge of barrier soils, geosynthetic materials, drainage media, contractor relationships. License/Registration: Must have valid driver?s license if driving on company business is required. Terracon offers an excellent compensation and benefits package including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status....

Auxiliary Operator - Nuclear (Ginna Nuclear Station)

Business Unit Overview Join Exelon Nuclear, and you will be part of a team responsible for operating a nuclear fleet that is the largest in the nation and the third largest in the world. With 14 operating plants and 23 reactors in Illinois, Maryland, Nebraska, New York, New Jersey and Pennsylvania, Exelon Nuclear provides enough clean energy to power 17 million average American homes annually. It is recognized as one of the best-run and most efficient nuclear fleets in the world. Illinois locations: Braceville, Byron, Clinton, Marseilles, Moline, Morris, and Warrenville Pennsylvania locations: Delta, Kennett Square, Middletown, and Pottstown New Jersey location: Forked River New York locations: Ontario and Scriba Maryland location: Lusby Additional Qualifications IND-1 Position Scope Job Summary: Under direct supervision, operates primary, secondary, and fire systems of the plant, and associated auxiliaries. Reports To: Shift ManagerPrimary Duties and Responsibilities: (*essential job functions)1. Participate in a formal training program to complete qualifications on four non-licensed watch stations at site (Outside, Turbine Building, Auxiliary Building, and Fire/Safety). 2. Makes periodic rounds to check condition of equipment, and for safe work environment.3. Monitors system operation by observing instruments, making inspections and listening. 4. Assists in handling new and spent fuel under supervision of an NRC licensed Senior Reactor Operator. 5. Assists in running periodic tests on equipment and systems as required by Tech Specs. 6. Acquires knowledge of integrated plant operation. 7. Operators provide on-shift fire brigade. 8. The Fire and Safety Watch (FASW) acts as leader for fire brigade, emergency medical/first aid, confined space rescue and hazardous material spill. 9. Operators are responsible for accurate documentation and record keeping, as required by procedures. 10. Must be a certified First Responder. 11. Performs assigned duties in the Emergency Response Organization (ERO) as assigned....

Sr. Mechanical Project Engineer

URS Corporation is seeking a Sr. Mechanical Project Engineer to be based in our Richland, WA location. We believe that success is ultimately determined by what you help your customers achieve. A company should be measured by what it accomplishes, not by what it promises. Creating an environment that encourages talented individuals to collaborate and solve complex problems attracts the best people. The more you can explore the diversity and potential of your people, capabilities and geographies, the more solutions you?re equipped to provide. We believe that every opportunity comes with a collective responsibility to perform. Being profitable should be a result of doing what you do safely, ethically and better than anyone else. And we believe that the potential for growth is limitless. It?s why we come to work. We are URS Energy & Construction. Global Management & Operations Services?Managing high-risk, technically complex programs and facilities for government clients is an area of expertise. We are the market leader in nuclear and high-hazard environmental management for the U.S. Department of Energy and are expanding that expertise to similar markets in Europe. We are also the only company in the United States to stabilize high-level radioactive waste. Responsible for providing engineering leadership, guidance, calculations, analysis, studies and recommendations for a specialized segment of engineering within schedule and budget of an assigned project. Develops and maintains close working relationships between the client and other Project Engineers, Project Managers, and Supervising Discipline Engineers on an assigned project. Will be part of a leadership team interfacing with the client and providing project engineering and design agency services to URS affiliates at the Hanford Site. Primary responsibilities: ? Prepares, reviews and approves drawings as required. ? Leads various size groups of engineers, designers and/or specialists. ? Complies with company's safety awareness program, office and/or field safety policies. ? Uses data supplied by the Project Engineering Manager and/or the Supervising Discipline Engineers to prepare a basic outline of work to be completed and establishes a schedule compatible with project goals and budgets. ? Develops and documents all calculations for assignments. ? Prepares and documents economic analyses and other system studies. ? Provides progress reports and alerts Project Engineering Manager and Project Manager about delays and specialized conditions. ? Prepares and presents expert testimony before regulatory bodies. ? Prepares and makes presentations to client and company management. ? Contributes to technical literature in area of specialty. ? Assists with the preparation of project scope within a specific discipline. ? Works toward alignment of customer and company objectives. ? Assists with interpreting codes and permitting as it relates to a specific discipline. ? Fully understands the use of vendor documents and can review documents for accuracy. ? Ensures quality, quantity, and completeness of the assigned engineering tasks. ? Acts with integrity in all elements of responsibility. ? Expresses ideas clearly and listens effectively to the ideas of others. ? Fully versed in business development concepts and methods and supports the project proposal process. ? Understands discipline tools and company cornerstone applications. ? Fully versed with the process of preparing and checking calculations as well as the approval, revision, retention, and storage of calculations within a specific discipline. ? Fully versed in the collection and/or evaluation of data and information regarding technical and economic factors including physical, chemical, environmental, maintenance, operational, regulatory, constructability, and/or schedule factors relating to a specific subject within a discipline. ? Fully understands the use of requisitions and the role of materials management. ? Reviews and advises on purchase orders and subcontracts. ? Assists with the development of manpower, man-hour and labor cost requirements to aid in evaluating the budget. ? Leads estimating tasks and performs material take off's for a specific discipline. ? Advanced knowledge of discipline's material costs, equipment and materials lists. ? Understands cost analysis and forecasting. ? Fully understands the planning and scheduling of engineering tasks. ? Understands the project change control process and identifies potential changes. ? Fully versed with and can check the work sequence, general content and the methods used to generate specifications for the purchase of material, equipment, systems, services or construction within a specific discipline. ? Can integrate all project functional requirements into a complete project plan. ? Maintains positive working relationships with peer leaders. FSGSG URSCB50...

Registered Nurse RN Nuclear Cardiology

- Nuclear Radiology RN needed - Days - Must understand understand cardiac medications and how to administer for radiologic studies - Tulsa, OK - Must have OK State License and 2 references - Starts ASAP lasts 8 weeks A Great Nursing Career is Closer Than You Think! Accountable Healthcare Staffing (AHS) is dedicated to finding people to help us fulfill our commitment to make healthcare human again. We staff our exemplary clients with healthcare professionals who approach every patient, every colleague, and every family member with compassion. We have openings for a Nurse with Nuclear Cardiology experience at a notable facility Tulsa OK featuring day shifts on 8 week contract , full benefits , a challenging assignment and top pay. Don't forget to ask about how you could earn an extra $800 dollars in gift cards and prizes like a Louis Vuitton handbag, an iPad, Beats headphones or even a big screen TV! Click here to learn about what it's like to work at Accountable AHS PLACES 100% OF QUALIFIED Registered Nurses !! We are also proud to offer our professionals the option of 100% true daily pay - you work hard for your money - decide how and when you get paid! Registered Nurse (RN) Duties and Responsibilities: 1. Provides direct professional nursing care to patients. 2. Completes and documents initial assessment of the patient according to the healthcare facility's guidelines. 3. Identifies physical, psychological, safety and educational needs of patient and family through initial and ongoing assessment. 4. Initiates and revises the patient's plan of care based on continuing assessments. 5. Includes patient teaching and discharge planning in overall plan of care. 6. Incorporates clinical and technical aspects of care with nursing actions and interventions in accordance with established policies, standards and procedures. Still need a reason to work with us? Available Work Schedule Day shift Benefits of Workings with Accountable Healthcare Staffing Include: - Flexible Schedule - Tax free travel stipend if 50mi or more from job site - Top Industry Pay - Referral Bonus(es) - 100% True Daily Pay Options - Affordable Medical, Dental and Vision (domestic partnership coverage available) - Basic Life/AD&D & EAP - Voluntary Life: Employee Spouse Child(ren) - Allstate Accident - Allstate Short Term Disability - Long Term Disability ? Company Paid - Short Term Disability ? Company Paid - 401k Profit Sharing Plan We are an Equal Opportunity, Affirmative Action employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply....

Nuclear Cost Analyst

Cost Analyst Description: Provide Project cost services for Fukushima Fleet Projects. Scope will include: monitor project cost/cost budgets or financial or business analysis. Present analyses, findings, and recommendations, relating to budgetary data. Project controls include cost development, and project monitoring using earned value methods (EVM). Demonstrated ability to interface effectively and collaborate with peers, clients, management, and other organizations....

Staff Electrical Engineer - Nuclear

Job Title Staff Electrical Engineer - Nuclear Job Type Direct Category Engineering No. Positions 1 Position Summary Responsible for developing Electrical Engineering Design change packages and calculations in support of maintenance or capital projects at a nuclear power facility. Plans, schedules, conducts and coordinates work requiring judgment in the independent evaluation, selection, adaptation and modification of standard engineering techniques, procedures and criteria. Performs work which involves conventional engineering practices, but may involve a variety of complex features. May coordinate departmental and divisional project studies and report preparation assignments. Verify and/or perform all design calculations. This position requires an experienced and competent individual capable of successfully solving difficult problems that require adaptation and modification of standard techniques, procedures and criteria. Must be capable of devising new approaches to problems encountered. Other duties as assigned. Requirements Bachelor's degree in electrical engineering from accredited program. Minimum 3 years related experience in the nuclear industry (completion of master's degree in related field may be substituted for one year of experience). Excellent written & verbal communication skills. Strong analytical and problem solving skills. Previous nuclear operating plant experience preferred. Registration as an FE. Knowledge of 10CFR50.59 process Nuclear Modification, Engineering Change Package Experience Equipment and System Design Experience Experienced in design reviews and design review preparation Education BSEE...

Nuclear Alarm Station Officer - Robinson Nuclear Station

Duke Energy is a diversified energy company with a portfolio of natural gas and electric businesses, both regulated and non-regulated, and an affiliated real estate company. Duke Energy supplies, delivers and processes energy for customers in North America and selected international markets. For more information about our business please visit us on the web at www.duke-energy.com. Depending upon the desired qualifications of the successful candidate, the hiring manager may elect to fill this position at a higher level within the job hierarchy. Nuclear Security Alarm Station Operator The Security Alarm Station Operator is responsible for the daily operations of the alarm stations and directing the armed security force to provide protection of a nuclear power plant/facility against radiological sabotage through compliance with all NRC security requirements as described in applicable Codes of Federal Regulations (10 CFR 73) and other associated relevant commitments (Physical Security Plan, Safeguards Contingency Plan, and Training and Qualification Plan). As directed, the Security Alarm Station Operator dispatches security personnel to assist other site organizations, specifically: Operations, Maintenance, and Major Projects, to provide security support as described in established procedures. Other duties include operation of the Physical Security Computer System and associated technologies to assess alarms and direct security force response. Responsible for day to day operations within the alarm stations to include completion of all Security Logs and Security Journals. The regulatory and public scrutiny in the nuclear security arena is critical. The Security Alarm Station Operator, in addition to having the appropriate technical and tactical mindset, must be able to instill public and regulatory confidence in this role. This position directly coordinates and directs response force activities during normal operations and contingency activities. The demands of the job are significant and the need for a highly skilled and motivated individual is critical. Monitors and directs security activities to maintain compliance with Federal Regulations, Security/Contingency Plans and Training and Qualification (T&Q) Plans. Directs security activities during routine and contingency events. Directly responsible for Alarm station operations and communication with shift responders. Monitor and operate the site Plant Security Computer System (PSCS) Dispatch responders to ensure immediate response and validation of alarms. Ensure security force personnel acknowledge completion of all alarm assessment actions. Contacts and maintains communications with Reactor Control Room during routine and contingency conditions. Contacts and maintains communications with LLEA as required by site operating procedures. Perform PSCS commands necessary to update the system and change access levels required to maintain control of Vital Area access authorizations in accordance with established procedures. Conducts job observations and post inspections. Reviews and submits logs, journals, and reports. Initiates Condition Reports along with work requests / orders. Completes security log entries in accordance with established procedures. Reviews Security equipment test procedures and assists in testing as described in established procedures. Maintains skills and knowledge associated with security posts, responses, CAS/SAS operations and contingencies. Maintain qualifications for Armed Responder and Armed Security Officer required to implement the site defensive strategy. Direct security force during contingency events. Maintains procedural knowledge and CAS/SAS qualifications and functions. Maintains physical fitness and firearms qualifications Working conditions This position requires strong skillset for multi-tasking and communication. Duties require the operator to work in an environment where sensory input must be identified, evaluated, and acted upon. Alarm Station duties are required 24 hours a day, 365 days a year by Federal Regulation. Ability to pass Radiation Worker Training and Plant Access Training...

NUCLEAR MED TECHNOLOGIST

Overview: How have you impacted someone?s life today? At Meridian Health, our Nuclear Medicine Technologists are focused on changing the lives of our patients by providing the highest level of care each and every day. The Nuclear Medicine Technologist is responsible for performing various Nuclear Medicine procedures in various areas of the hospital. These examinations can be done independently or under the direct supervision of a Radiologist. Our complete spectrum of Nuclear Medicine Services will allow you to apply your skills in multiple settings while building your career all within New Jersey?s premier healthcare system. Responsibilities: Nuclear Medicine Technologist working in a fast paced environment Operating Nuclear Medicine equipment and preparing radiopharmaceuticals.with two cameras. Must be able to multitask and structure competing priorities. The Nuclear Medicine Technologist is responsible for direct patient care, imaging and patient safety. The Technologist is responsible for all aspects of the Radiopharmacy to include dose preparation and disposal. The technologist will be responsible for utilizing various pieces of Imaging equipment throughout the hospital, performing quality control and patient imaging. The Nuclear Medicine Technologist will be responsible for using various hospital computer systems to include but not limited to NMIS, PACS, RIS as part of normal day to day activities....

Nuclear Safety Analyst (#3015)

This position entails performing nuclear safety analyses of a variety of facilities/installations that deal with nuclear materials including, Department of Energy weapons material production facilities, nuclear facilities undergoing decommissioning, both commercial power and test nuclear reactors, and ancillary facilities such as spent fuel pools. Primary emphasis is on analyses of nuclear criticality, radiation shielding, and dose consequence evaluations associated with both ongoing operations as well as potential accident scenarios. Secondary emphasis is on other accident analysis activities including hazards evaluation and accident progression modeling (heat transfer, fluid flow, materials response, etc.). Work will include performing reviews of design criteria, developing hazards and accident analysis technical reports and creating modifications to safety basis documents. The successful candidate will need to evaluate, select, and apply standard engineering methods, techniques, procedures and criteria, using independent judgment in analytical tasks. They may participate in or lead facility hazards/safety assessments and be a primary interface with design engineering and operations representatives to optimize incorporation of nuclear safety requirements into the design and licensing aspects of nuclear facilities. They will work with the Project Manager and Client to ensure a quality on-time deliverable, within budget. Opportunities also exist for participating in the development and pursuit of new projects, including marketing support and scope and budget development for new work....

Sr PGD Engineer- Nuclear Performance Monitoring

Senior Engineer ?Nuclear Performance Monitoring Senior Engineer Description : We are seeking a candidate that has subject matter expertise in Nuclear Power Generation to execute monitoring plans, support predictive monitoring and efficient operation of Nuclear power plants and associated machinery. Responsibilities include : This position involves reviewing, modifying, and executing system and component monitoring plans for a remote monitoring center that are tailored to the needs of nuclear power plants The candidate will work collaboratively with nuclear power plant system experts, monitoring center engineers, and software developers to implement remote monitoring solutions tailored to failure modes of all monitored systems, and support troubleshooting and adjusting of same. Candidate must have knowledge of all the major systems in a nuclear generating plant, and how they interact to be able to develop an effective monitoring plan. Candidate should be familiar with the various plant processes, instrumentation, and sources of data within a power plant, data acquisition systems, and how to retrieve data from same. Candidate MUST have experience using statistical analysis tools for troubleshooting and data analysis. Proficiency in use of the OSISoft PI software is required for success....

Sales Engineer (Subsea / Nuclear Manufacturing Sales)

WFI International Sales Engineer (Subsea / Nuclear Manufacturing Sales) Job Description WFI International, a Bonney Forge Company, is a leading manufacturer of ferrous and non-ferrous branch connection fittings, specialty flanges, and seamless fittings for use in piping systems and on pressure vessels. We are looking for an experienced Sales Engineer to join our team focusing on selling subsea / nuclear manufacturing products. As a Sales Engineer, you will focus on selling subsea and nuclear products; this includes proposal preparation and project coordination. If you are looking for an opportunity to grow your career with a leading manufacturing organization, we want to talk to you. This role has unlimited potential for motivated candidates, great compensation, and a full benefits package! Sales Engineer (Subsea / Nuclear Manufacturing Sales) Job Responsibilities As a Sales Engineer, you will be responsible for selling subsea and nuclear products requiring extensive technical expertise and support for installation and use, such as material handling equipment, numerical-control machinery, and computer systems. Additional responsibilities of the Sales Engineer include: Performing related duties, including estimating, proposal preparation, and order implementation Performing project coordination duties while working with technical engineers and commercial levels with OEMs, engineers, companies, fabricators, and distributors involved with offshore, subsea, naval ship construction, and nuclear power plant piping systems Sales Engineer (Subsea / Nuclear Manufacturing)...

Nuclear Technical Consultant

For over 180 years, Bureau Veritas? passion has been supporting clients to protect their brand, assets and businesses through our expertise in the areas of conformity assessment and certification of quality, health, safety, environment and social responsibility. Our clients know that with BV on their side, nothing is left to chance. With over 58,000 employees in 145 countries worldwide, Bureau Veritas has the resources to serve in virtually any geographical region. In the U.S, we offer exciting national and expatriate global employment opportunities in the areas of inspection, testing, code compliance, engineering and consulting services. Founded in 1828, Bureau Veritas is a global leader in Testing, Inspection and Certification (TIC), delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection, and social responsibility. Bureau Veritas offers innovative solutions that go beyond simple compliance with regulations and standards, reducing risk, improving performance and promoting sustainable development. Contributes to the successful implementation of OneCIS?s ASME Section III QA Program elements including client/ANI audits and training. Performs required ISO 9001 audits for OneCIS clients per the BV Certification QA program. Performs PED Quality Module audits; Performs PED Level 3 activities. Principal Duties and Responsibilities: 1. Responsible for Nuclear Technical Consulting. Maintains an awareness of applicable regulatory and technological developments. Prepare and disseminate directives and procedures, subject to management review, to ensure proper application of inspection requirements for PVA field staff to maintain operations. 2. Performs all of the assigned Nuclear audits. 3. Generate and administer written nuclear training as well as on-the-job training for authorized inspectors. 4. Provides a written Section III ASME Synopsis for each new ASME Code Edition and updates as they become available. 5. Contributes ASME Nuclear technical content to the PV, BV Website. 6. Perform PED Level III activities; Technical File Reviews, Quality System Audits and provides supervision to PED Level II. 7. Performs ISO 9001 Audits for OneCIS clients per BV Certification QA Program. 8. Provide technical content for ASME Synopsis and Technical Bulletins. Decision-Making Authority/Accountability Level: Applies industry knowledge, technical skill and sound business practices to decision making. Minimum Knowledge, Skill, and Ability Requirements: Maintains an awareness of current inspection and auditing methods and Best Practices; interpreting and incorporating applicable regulatory and technological developments into OneCIS operations. Must have the ability to interact with Management, customers and staff. Excellent verbal and written communication skills....

P6 Scheduler - Nuclear Outage

P6 Outage Scheduler We currently seek a high caliber P6 Scheduler (Nuclear Outage for a Short-term basis within our client?s team of experienced professionals. Based in Avila Beach, CA. Job Requirements Previous NUCLEAR outage experience A MUST ***Person is also provided 7 Day Per Diem (non taxable), mileage to/from site, and travel per diem.***...

Lead Scientist ? Molecular or Nuclear Physicist

Group: MSS Clearance Level Needed: Secret Shift: Day Category: Scientific / Analytical ManTech is seeking a Lead Scientist with experience in molecular and/or nuclear physics applications to support a DHS customer with research, development, test and evaluation of novel sensors for detecting minute/trace quantities of explosives. The Lead Scientist supports the lead PM, government PMs and other leads with their RDT&E projects that deliver new capabilities and technologies to DHS operational components and federal, state and local law enforcement organizations. The Lead Scientist performs the functions of a technical expert in support of major programs or system development; applies scientific expertise in defining and resolving system issues, performing analysis and developing plans and equirements in the molecular/nuclear physics field; provides scientific assessments of performer and potential technologies for explosives detection with emphasis on x-ray detection; coordinates preparation of analysis, evaluations and recommendations for proper implementation of programs and systems. General Responsibilities: ? This position requires general knowledge in the broad areas of aviation security, facilities protection, intermodal security and improvised explosives ? Performs all system analyses with emphasis on explosives and minute/trace amount of explosives that could be used to form improvised explosive devices or home-made explosives ? Supports requirements definition and analyses, cost/performance trade analysis, feasibility analysis, regulatory compliance analysis support, technology conceptual designs, and other special studies and analyses. ? Supports risk assessment analyses employing modeling and simulation techniques. ? Supports technical training, configuration management, and quality assurance activities. ? Supports system maintenance planning and integrated logistics support methods to meet customer O&M needs. ? Demonstrates written and oral communication skills. Mandatory Skills Requirements: ? Technical molecular and/or nuclear physics expertise and skills ? Technical evaluation, project analysis, risk mitigation, technical writing, preparation of briefings, test and evaluation support, data management, and financial management ? Effective oral and written communication skills ? Ability to support multiple, on-going projects Other skills Preferred: ? Science & Technology Research and Development experience is highly prferred ? Demonstrated initiative, sound judgment, effective decision-making and excellent oral and written communication skills Minimum degree is Master&s, PhD is preferred...

Nuclear Medicine Technologist

NuclearMedicine Technologist for an imaging center with two cameras andPET/CT. The Nuclear Medicine Technologist is responsible for directpatient care, imaging and patient safety. Daily functions includeall aspects of radiopharmaceutical receipt and distribution, performingquality control and patient imaging. The Technologist will be responsiblefor using various computer systems for documentation including PACS andRIS as part of normal day to day activities....

Nuclear Medicine Tech

Nuclear Medicine Tech Job Description Overall : Operate gamma camera and related equipment to produce images for interpretation Maintain the integrity and quality of the Nuclear Medicine Department Performs phlebotomy as a route of injection of radiopharmaceutical as well as for performance of blood analysis Other related duties and responsibilities as determined by the department at its sole and exclusive discretion Accountability: Manages time resources effectively while managing multiple priorities; completes and submits all projects as directed and in a timely manner Follows through on all aspects of job duties in a self-initiated manner Appropriately delegates tasks while maintain accountability Maintains and implements standards and training to adhere to statutory regulation Manages the day-to-day activities in accordance with policies and procedures: Analyzes and resolves problems independently as appropriate Knows how and when to refer decisions to others Verbal and written communications are consistently appropriate, clear and accurate. Listens to and responds to others appropriately Contributes to the development, maintenance and administration of up to date department policies and procedures, which are revised on an annual basis. Is knowledgeable of and consistently enforces all policies and procedures Actively participates either individually or as a team member on committees and in special projects Encourages employee participation Develops and maintains a service orientation in performing duties with fellow employees, patients, medical staff, and visitors: Consistently maintains an effective service oriented approach in working with patients, staff, and visitors Coordinates continuity of service quality interdepartmentally by relationship building with other departments and department heads Maintains working relationship that reflects mutual respect, courtesy, and a service management orientation Demonstrates proper, efficient and courteous telephone manners at all times...

PRN Nuclear Medicine Technologist

e CancerCare is one of the leading operators of outpatient cancer care centers in the nation. Our core focus includes building a best-in-class network of comprehensive cancer care facilities through partner acquisition, service-line conversion, and de novo development. e CancerCare operates multiple cancer care facilities across the country offering a variety of cancer imaging, chemotherapy, radiation therapy services and support services, all under one roof. We are a company committed to delivering quality care to each and every customer we serve, and quality care starts with exceptional associates. We are currently seeking an experienced PRN Nuclear Medicine Technologist to join our Houston, TX team! Performance Objectives: * Deliver platinum level care and customer service to our patients. * Possess exceptional phlebotomy skills. * Inject radiopharmaceuticals and scan patients with diagnostic imaging equipment. * Process images and push to pacs. * Run QC scanning equipment; facilitate repairs if necessary. * Greet patients and families; escort the patient throughout the facility. * Ability to relate to patients, their families, physicians and their staff is imperative. * Adhere to safety standards on federal and state levels....

Nuclear Med Tech PRN - Forest Campus

The Nuclear Medicine Tech conducts procedures with radioactive isotopes in order to provide diagnostic aid to physicians. The position's tasks and responsibilities include: Prepares radioactive isotopes for administration to patients in accordance with physicians' orders. Positions patients and adjusts immobilization devices. Explains procedures to patients and addresses concerns. Administers and records isotope dosage utilizing the Syntrac software. Performs diagnostic studies on patients using a gamma camera. Administers therapeutic doses of radiopharmaceuticals under direction of physician. Maintains and calibrates equipment. Monitors, records and communicates as appropriate utilizing computerized documentation systems. Utilizes knowledge of age specific needs of patient in performance of duties and responsibilities. Assists with transporting patients. Orients and mentors new staff members. Follows radiation safety techniques in use and disposal of radioactive materials. Follows Standard Precautions using personal protective equipment as required...

Nuclear Controls Systems Engineer

- As an Instrumentation and Controls Engineering project engineer, this position will offer you the opportunity to lead a project team consisting of engineers and designers involved in the design, modification, and analysis of new and existing nuclear power plant electrical systems. ? You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of instrumentation controls engineering issues. ? Act as the Instrumentation and Controls team lead in the coordination of detailed design phases for all aspects of controls engineering work. ? Lead efforts to ensure projects are completed satisfactorily, on time, and within budget. ? Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements. ? Prepare and review detailed calculations for digital controls applications. ? Prepare documentation for design input for drawing production including master diagrams and master schematics. ? Interface with vendors to prepare materials and equipment purchase specifications for client recommendations. ? Prepare reports and studies that present technical information in a clear and concise manner and meet client requirements and S&L formats. ? Perform independent reviews of work performed by others including calculations and drawing preparation. ? Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L?s systems of process and associated ?Communities of Practice.? ? Provide guidance as a mentor in the development of less experienced engineers....

Nuclear Medicine Technologist - Per Diem 7:30a-4p

The Nuclear Medicine Technologist will prepare and administer radioactive chemical compounds; calculate, measure and record radiation dosage; perform scans according to defined standards and departmental protocols; assist in maintaining records; utilize PACS and AIMICAS RIS systems. The position is intended for call coverage with additional shift coverage as available....

Industry Segment Manager - Water/Waste Water

Our client is a leading world-wide supplier of automation technology and the global performance leader in industrial training and education. With over $3 billion in global revenue in 2013, our client employs 16,200 employees in 250 branches in 61 countries with an overall presence in 176 countries. The company creates over 2900 new patents and 100 new innovations and products annually for its 300,000 global customers. Our client invests more than 7.5% of its turn-over in R&D and a considerable amount in the development of its employees world-wide. This role is responsible for developing a market approach strategy to guarantee continuous growth in Water/Waste Water segment in Region Americas. It will establish continuous and long term business relationships with relevant customers in Americas and will analyze, evaluate and define regional target accounts together with our companies in Americas. The incumbent will drive sales growth in Industry Segment Water/Waste Water, especially in defined Key Accounts. ? Promote suitable and competitive solution concepts for customers of Water/Waste Water segment ? Provide industry segment specific support for events like trade shows, customer days, lunch & learns, etc. ? Develop market and application knowledge from sales force across the Americas. Create Application Success Stories ? Communicate and network with Process Automation Leaders and Water ISM?s across the Region to develop cross-border projects ? Identify, push and track ongoing projects for Water/Waste Water segment across Americas ? Support sales engineers at specific sales calls related to key projects involving Water/Waste Water customers ? Improve product range for Water/Waste Water segment (Close product gaps, missing approvals, features, etc.) ? Support the Process Automation to efforts to engage more of our Field Sales Team for better Process Automation coverage...

Master Scheduler - Nuclear

Job Description The Nuclear Business Unit Master Scheduler is responsible for developing and maintaining the schedule to optimize the use of personnel resources. The master schedule is the primary tool used to communicate the objectives and successes of the team within the Nuclear department and to the wider company stakeholders. The successful candidate will have prior project management and/or master scheduling experience and strong communication and conflict resolution skills. In this role you will interface frequently with all members of the Nuclear and Engineered Products group. The objective of these interactions will be to understand the expected durations for task completion. On a periodic basis, you will be required to provide progress updates to the various internal stakeholders of the Nuclear Business Unit. The majority of the Nuclear workload is driven by the MRO and Next Generation programs that represent current fleet operations as well as future opportunity. The successful candidate must have strong verbal and written skills to successfully communicate with and among these groups. Job Responsibilities: Maintain and continuously improve a master scheduling system which will manage the work going through the Nuclear Business Unit. Interface with other functions inside the company and provide project management support for larger, complex programs. Analyze schedules with the ability to make recommendations to ensure accuracy, completeness and minimize risks Forecast future performance and perform risk analysis of schedules Provide Management with an understanding of the current schedule, risks, opportunities, and recommended actions to ensure future performance Review and analyze schedule performance against baseline plans Generate and improve metrics to accurately measure the team performance Investigate potential impact to schedules associated with projects scope changes Maintain and improve the orders database Other duties as assigned Knowledge & Skill Requirements: Advanced Microsoft Project (or similar software) Scheduling Skill 5 years in an engineering resource and deliverable scheduling role highly preferred Project management skills Experience in conflict resolution Problem solving and analytical skills The ability to deliver effective presentations, written reports and proposals Ability to successfully analyze and present data to multiple levels of the organization PMP or PMI-SP preferred Educational Requirements: A minimum of 5 years in a Master Scheduling role is preferred A bachelor?s degree is highly preferred. Additional years of experience, especially in project management and scheduling; may be considered in lieu of the degree when combined with a technical Associate's degree. Additional Company Information Organization Profile Fisher Controls International LLC, an Emerson Process Management business, is the largest control valve manufacturer in the world. Industry standard products as well as an emphasis on product research and testing enables the development of new Fisher® control valves to solve production, processing, and distribution needs for the following major industries: chemical, oil and gas, refining, pulp and paper, power, water and wastewater treatment, mining and metals, food and beverage, and pharmaceutical. For more information, please visit www.fisher.com . Experience the Rewards A career with the Emerson Process Management, Fisher business provides an excellent benefits package which, based on location, may include the following benefits: medical, prescription drug and dental plans; vision; 401k with company match; pension plan; company paid life, AD&D, and travel insurance; educational assistance in form of tuition reimbursement; short-term and long-term disability plans; matching gift program; wellness incentive program; and generous holiday and vacation plans. Who May Apply The company will only employ those who are legally authorized to work in the United States for this position. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. We are an Equal Opportunity Employer. It is Fisher policy to recruit, hire, train and promote people in all job classifications without regard to race, color, religion, gender, sexual orientation, national origin, disability, veteran status or age, and any other factor prohibited by law....

NUCLEAR MEDICINE TECHNOLOGIST - FULL TIME / DAY

Join our team of professional and passionate health care professionals who are committed to the well-being of our patients and provide patient care based on competence, professional expertise, knowledge and evidence based practice. Our Nuclear Medicine Technologist positions are critical to the success ofMark Twain St. Joseph"sHospital and require the full understanding and active participation in fulfilling the Mission of Dignity Health.It is expected that our employees demonstrate behavior consistent with the Core Values. The Nuclear Medicine Technologist performs imaging procedures and computer analysis for medical diagnosis under the direction of the Radiologist/Medical Director and in accordance with established departmental procedures. REQUIREMENTS : Minimum of one-year clinical experience in a hospital nuclear medicine department. High School graduate. Satisfactory completion of an AMA approved program in Nuclear Technology. Knowledge of Nuclear Medicine procedures and techniques. Understanding of current ethics, laws, and regulations. Understanding of nuclear medicine theory and procedures, safe handling and disposal of radioactive materials. Understanding of current ethics, laws, and regulations. Requires minimal supervision and interaction in day-to-day fulfillment of job responsibility. Demonstrates a quality attitude toward patient care. Must be currently registered and certified with the State of California Radiologic Health Branch and the American Registry of Radiologic Technologists (ARRT) or must be registry eligible by the Nuclear Medicine Technologist Certification Board (NMTCB). Must be CPR certified. Mark Twain St. Joseph"s Hospital is a member of Dignity Health . The word "dignity" perfectly defines what our organization stands for, showing respect for all people by providing excellent care. Mark Twain St. Joseph"s Hospital opened on August 26, 1951 and is located in beautiful San Andreas California. Since opening, Mark Twain has provided the highest quality health care for all those needing medical care in Calaveras County. We offer care, expert staff and state-of-the-art equipment to meet the growing needs of our community and are committed to the values of dignity, collaboration, justice, stewardship and excellence....

Nuclear Medicine Technologist, PRN (IPMC)

Performs a variety of duties in preparing patients for nuclear medicine procedures, to furnish diagnostic information. Operates scintillation detectors to produce images and measures concentration of radioisotopes in specified body areas on patients ages ranging from neonates to geriatrics. Scan the patients?making proper settings on gamma camera and manipulate computers to process the studies. Reads or surveys the amount of radiation given off by certain radioactive material shipped to the department. Assays the radioactivity of newly arrived radiopharmaceuticals. Measures the radioactive dosage prescribed for patients and performs IV injections of Radiopharmaceuticals. Follows all state and NRC regulations pertaining to the field of Nuclear Medicine. Follows ALARA regulations. Knows and performs Quality control on all equipment in accordance with Nuclear Medicine license. The Nuclear Medicine Tech will be of strong ethical character. They will adhere to the SNMT Clinical Performance Standards for NM Technologists, to include the administration and monitoring of adjunctive medication(s) used during an in-vitro, diagnostic imaging, or therapeutic procedure. Adjunctive medications are defined as those medications used to evoke a specific physiological or biochemical response. MSHA expects that every team member will role model Patient-Centered Care behaviors and be guided by MSHA's Values and the Principles of Patient-Centered Care. It is vital that an individual in this position be capable of good communication skills. It is of the utmost importance that written communication is legible. MSHA expects all team members to support the VOS initiative by demonstrating awareness of the VOS system and effectively applying it to his/her work. Job duties of this position may require access to protected patient information (PHI). The team member will be accountable for appropriate use of the record and compliance with all confidentiality and security policy and procedures related to use, access, and disclosure of PHI. REPORTING RELATIONSHIP This position at Indian Path Medical Center reports to the Technical Imaging Manager. This position supervises students. (Clinical) The Nuclear Medicine QC Technologist will be the team leader for this Technical Imaging Manager work group. The Washington County facilities report to the Lead Technologist. This position at Sycamore Shoals reports to the Radiology Manager. EDUCATION AND EXPERIENCE Must be ARRT registered in Radiology or Nuclear Medicine or certified by N.M.T.C.B. Two years experience as a registered/certified Nuclear Medicine Technologist is preferred....

Project Delivery Director, Nuclear

Delivery Director - Nuclear Location: Lake Forest, CA As part of the Invensys team you'll build a strong career with a collaborative, knowledgeable team of people. We'll challenge you to think differently to achieve your goals. You'll have easy access to senior management, leading thinkers, and colleagues around the world. In addition to competitive salaries and inclusive benefits, we offer global career opportunities and travel to new places to inspire fresh, new thinking. We believe in rewarding and recognizing risk-taking and creativity. We also promote a healthy work-life balance as essential for your personal growth. RESPONSIBILITIES ? Ensures engagement reviews and quality assurance procedures are implemented on all Nuclear Projects to deliver on time, budget, and quality to the client. ? Develop suitable metrics/KPI?s to monitor Nuclear Organization performance and commercial/contractual execution ? Support the ongoing audit and review, governance and escalation process for key issues within the full lifecycle ? Oversee and coach project directors/project managers working on Nuclear projects in coordination with delivery leadership. ? Define effective and appropriate KPI?s/measures for Nuclear Project performance and use for reporting to Senior Management. ? Support delivery in monthly project reviews and development of delivery execution capabilities, including skills and competency assessment and training/development of PM and PD skills. ? Provide direct management and support/intervention to Nuclear projects according to review/governance/escalation criteria and process ? Provide consultation and support of Nuclear projects during the proposal and sales phases to ensure effective delivery of the bid and maximise the chances of securing a contract. Provide consultation and support of major projects during project initiation and kick off phase to ensure robust handover from sales to delivery phases ? especially the setup of commercial/contractual execution plan ? Provide critical review of bids (Commercial/contractual/proposal review) to ensure that major risks are appropriately taken in to account and where possible mitigated ? Available to support commercial/contractual negotiations ? Ensure appropriate tools, processes, standards are deployed on the Nuclear Projects (commercial/contractual change management processes) ? Regular review of all aspects of project management including client engagement and satisfaction, commercial/contractual performance and KPI measurement throughout lifecycle. ? In partnership with Supply Chain, the project team, SME (subject matter experts) and project directors/project managers, identify opportunities to reduce project costs and maximize gross margins. ? Drive the control and monitoring of scope management and change orders in case of project expansion or delays to maximize margins and cash.. ? Ensure major project risk /opportunity management process linked to forecast, contingency management and planning process is linked to commercial/contractual execution plan QUALIFICATIONS ? Minimum 10 years Nuclear project commercial/contractual experience within a Program Management Organization in the implementation and project management of large industrial systems projects for the commercial nuclear power industry. ? Commercial/Contractual experience running multiple, high value, high risk projects. ? Specific experience within Nuclear I&C (Instrumentation & Control) disciplines with full scope execution essential. ? Multi-regional execution of complex Nuclear projects experience required. ? Discipline, governance, strategy development and planning for Nuclear projects. ? 10+ overall professional experiences in account development, multi-purchase agreement, multinational or complex integrated systems. ? Business development or sales experience in major projects pursuits preferred. ? Drive and ability to move the needle on Invensys strategy and vision to be number one player in global Nuclear Industry. ? Strong client facing skills ? Collaborative management style ? Results oriented CORE COMPETENCIES AND ORGANIZATIONAL RESPONSIBILITIES Commercial Management ? Understands profit and loss within a project accounting environment ? Able to lead commercial treatment of project bids/proposal within IOM sales/financial and commercial guidelines ? Consolidates and analyzes commercial risk/opportunity including profitability, revenue, margins, POC rates and utilization across practice. ? Helps create pipeline forecasts of the change orders and broad-based financial picture for practice with other stakeholders ? Understands commercial/contractual relationship and tradeoffs in driving financial performance ? Understands legal and contractual constraints and how they impact commercials ? Helps to ensure the organization meets or exceeds budgeted financial objectives, including revenue and margin....

Nuclear Medicine Tech III PRN

Associate Degree Required Under indirect and some direct supervision of a physician or department manager, the technologist will assist in the receipt, storage, preparation and administration of radiopharmaceuticals and other duties assigned. Performs medical imaging techniques and related procedures to demonstrate anatomy for interpretation and/or intervention by, or at the request of a licensed practitioner. Exercises professional judgment in the performance of services and maintains a demeanor complimentary to medical ethics. Applies appropriate patient care and recognizes patient conditions essential for successful completion of the nuclear medicine procedure. Maintains, at all times, an attitude of teamwork, flexibility and accomplishment of goals in accordance with established Regional Respect values and specific performance standards. Job Requirements Graduate of AMA School of Nuclear Medicine or equivalent. 1 year Nuclear Medicine required. 2-4 years Nuclear Medicine preferred. ARRT(N) or CNMT SCQRSA and ARRT (CT) or ARRT (R) and CPR. NMTCB (PET) preferred....

Principal Engineer - Nuclear Design / Core Monitoring

Energize your career with Westinghouse Electric Company! Our commitment to safe, clean nuclear energy is second to none. As we recognize the 128th anniversary of Westinghouse Electric Company, we celebrate our rich heritage of technical innovation and commitment to ensuring our global customers? success. If you are interested in being a part of a company that values exceeding customer expectations and providing future generations around the globe with emission-free energy, we want to hear from you. We are currently seeking a Principal Engineer in Nuclear Fuels within the New Reactor Technology team at Westinghouse Electric Company. The New Reactor Technology team is responsible for core design and analysis associated with new nuclear reactor applications. Today, our primary focus is on delivery of the AP1000® Pressurized Water Reactors in China and in the United States. In this position, a Principal Engineer can expect to perform the following duties: 1. Support team in completion of final nuclear analysis deliverables for the plants under construction (e.g., design reports, technical support documents, etc.) 2. Address emergent issues supporting core design, safety analysis, etc. during the delivery process 3. Develop core design inputs to plant startup testing and provide consultation to startup testing and operations training teams as requested 4. Support the use of the BEACON Core Monitoring System at new plants 5. Develop relationships with new plant customers and technology partners around the world (including occasional travel and consultation) EOE of Minorities/Females/Vets/Disability The successful candidate for this position will possess the following: * Bachelor's degree in Engineering required; Advanced degree in engineering required. * A minimum of six years of applicable technical expertise is required; eight plus years preferred. * Demonstrated expertise in a combination of core design, reactor engineering, and core monitoring applications highly desired * Must work independently, be self-motivated, and able to work in various roles within teams of diverse technical expertise * Ability and willingness to function in a leadership role. Excellent communication skills required. Westinghouse Electric Company is a group company of Toshiba Corporation. Check us out on Facebook at www.facebook.com/Westinghousenuclear or follow us on twitter at WECNuclear. Westinghouse employees enjoy a comprehensive benefits package including Competitive Pay, Medical, Dental and Vision Insurance, Short Term Disability & Long Term Disability, Life & Accident Insurance, Flexible Spending Accounts, 401k Savings Plan, Retirement Contribution Account and Paid Vacation. We also offer a number of work/life programs such as flextime and a variety of training and development opportunities. Westinghouse is an Equal Opportunity Employer ? Minority / Female / Disability / Vet...

Nuclear Medicine Technologist - PRN

Nuclear Medicine Technologist - PRN309489Shady Grove Adventist Hospital;WashingtonAdventistHospitalLimited Part Time (PRN)Regular Return to Previous Page Responsibilities1. Assists the Lead Nuc Med Technologist with planning and organizing. 2. Produces high quality nuclear medicine images consistently, and accomplishes computer processing and image enhancement. 3. Interacts with the radiologists to ensure proper protocol for complicated or unusual procedures. 4. Performs daily QA checks as required by state and federal regulations 5. Maintains patient confidentiality, safety and comfort. 6. Interacts with the radiologists and health physicist to ensure radiation safety. 7. Maintains records to comply with NRC and state regulations. 8. Maintain a patient schedule that produces quality images in the most efficient manner, while serving the community needs. 9. Evaluates schedule to accommodate emergency cases. 10. Prepare and administer radiopharmaceuticals. 11. Demonstrates the knowledge and skills necessary to provide compassionate care appropriate to the age of the patients on their assigned unit/department. 12. Work on Call and weekends as needed.QualificationsGraduate of an accredited Nuclear Medicine program and/or Must be registered as a Nuclear Medicine Technologist by the A.R.R.T./NMTCB or CT Certified Licensed by the State of Maryland Must be able to operate a hybrid (PET/CT or SPECT/CT) camera. Valid BLS-CPR certification required upon hire; must be maintained thereafter One year experience preferred Must be proficient in IV access Able to handle a multi task environment and work independently Strong Customer Service SkillsWork ScheduleShifts include: M-F : 7am - 3:30pm or 8am - 4:30pm and on call starting 4pm-7am next day. Weekends 7am -12pm and on call 12pm-7am next day On- Call - 45 min. Holidays on call 7am-7am next day (24 hrs)Equal Employment OpportunityAdventist HealthCare is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, disability or any other basis prohibited by law. Return to Previous Page...

Waste (Garbage) Refuse Collectors

Getting It Done At Labor Ready Everyone likes to feel pride in their work. At Labor Ready, we make that happen. We have opportunities right now for hardworking people looking for a reliable paycheck. You can find flexible assignments in construction, manufacturing, retail, warehousing, events, hospitality, waste, restoration and auto services. Labor Ready is currently hiring several Waste (Garbage) Refuse Collectors in Orlando, FL. These are long term temporary positions! If you?re dependable and looking for work, contact Labor Ready today. Job Description: Individuals will be responsible for riding on the back of the waste refuse trucks picking up trash in residential neighborhoods. Ideal Candidates: Excellent attendance Adhere to safety standards Pay Rate: Starting at $7.93/hour Shift/Hours: Early morning Shift ? 5:15 AM until work is completed ? 8 or more hours per day How to Apply: Submit resumes online for consideration Find a branch near you: http://branchlocatorlr.laborready.com/default.aspx Labor Ready is an equal opportunity employer. Candidates must be willing to submit to a formal criminal background check and drug screen prior to placement, if required. TrueBlue Companies Centerline Professional Truck Drivers CLP General and Skilled Construction Labor Ready General Labor PlaneTechs Aviation Manufacturing and Maintenance Spartan Manufacturing and Logistics TransTechs Skilled Diesel Mechanics TrueBlue Construction, Manufacturing, Transportation, Services, Logistics Ask us how YOU can sign up to receive Work Alert texts for jobs you may be interested in....

Nuclear Medicine Tech PRN

Job Description Nuclear Medicine Tech PRN(Job Number: 00056-5108) Work Location: United States-Florida-Plantation-Plantation General Hospital - Fort Lauderdale Area Schedule: PRN/Per Diem Description Nuclear Medicine Tech- PRN Plantation General Hospital Plantation, FL Facility Description: Plantation General Hospital is a full-service facility that is fully accredited by The Joint Commission and has been providing a range of healthcare services to residents of Plantation and Central Broward County for 45 years. Our nationally recognized centers of excellence specialize in maternity, high risk maternity, pediatrics, pediatric intensive care and Level III neonatal intensive care have earned us a distinguished reputation for quality. Plantation General Hospital is recognized by The Joint Commission as a Primary Stroke Center and as a Center of Excellence in Neonatal services, one of the only three in the nation. We deliver the very best care to our communities and the patients we serve. Plantation General Hospital is a member of the nation's leading provider of healthcare services, Hospital Corporation of America. HCA Ranks on Fortune's list of Most Admired Companies for three consecutive years. In addition, HCA has also been named one of Ethisphere's World's Most Ethical Companies for four consecutive years. Join our tradition of excellence! Benefits: We offer a generous compensation package for Full-time and Part-time including: vacation, 401k, and Medical Insurance. Job Description: Performs a motion-free exam. All pediatric devices and techniques must be utilized to obtain a quality exam. Reviews prep information with a Radiologist prior to distribution to the parent or legal guardian Always explains the procedure to the child using terms which they will understand. Performs all exams according to the Policy and Procedure Manual. Always makes the patient comfortable and recognizes the needs of a patient during the procedure. Assesses potential for skin integrity. Always interacts with your Coordinator or Nursing on any error observed on the exam requisition. Advises Nursing of any signed consent forms needed prior to a procedure. Always checks the chart for the physician's order prior to the exam. Qualifications Qualifications: ARRT Certification in Nuclear (N) or NMT CB Req 1-3 years of previous experience in a hospital setting required Current BLS required Must have critical thinking skills Previous experience with Pediatrics pref PI82326975...

NUCLEAR MED Technologist - ALLIED: IMAGING / CATH

Unit: NUCLEAR MED TECHNOLOGIST Flexible Per-Diem Shifts Available Now at Multiple Facilities in the Area! - Competitive Pay Rate - First Called / Last Canceled - 401k w/ Company Match - Weekly Pay / Direct Deposit Looking for a challenge and rewarding career? Can you accept change, adapt well, fit in, and be independent? If you are an NUCLEAR MED TECHNOLOGIST with flexibility and motivation to Expand Your Experience, look no further. If you consider yourself seasoned, clinically competent with critical thinking skills and people skills who can hit the ground running we want to hear from you. Requirements: - Graduate from an accredited school - Minimum one year acute care experience in a Hospital setting - Current State Licensure if required - Appropriate certifications for position you are applying for Parallon Workforce Management Solutions is uniquely positioned to provide Healthcare Professionals exceptional Career Opportunities across the US! Flexibility Nothing can match the flexibility that comes with per diem shifts. Schedule your work around what's important to you instead of the other way around. Higher Pay Per Diem shifts are paid at a higher rate. The flexibility to pick up shifts as needed, combined with higher wages allows you to maximize your earning potential. Expand Your Experience Having the opportunity to work in multiple facilities will expose you to new coworkers and patients, ultimately broadening your career experience. PI82683491...

TECHNOLOGIST-NUCLEAR MEDICINE

Performs imaging procedures/treatments according to radiology practice standards in order to aid in the diagnosis and/or treatment of disease. Performs other duties as assigned....

NUCLEAR MED TECH-Casual

Performs diagnostic examinations and therapeutic procedures utilizing radionuclides and radiopharmaceuticals under the direction of physicians licensed to possess and use radioactive materials. 2 years Nuclear Medicine experience preferred. Education level necessary to obtain required licensure and certifications. Language Skills: Ability to read an interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and how to draw and interpret a bar graph. Ability to apply advanced mathematical concepts such as exponents and logarithms. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Licensed under the California Radiologic Health Branch in Nuclear Medicine (RG-RHNM) and BLS required. ARRT and/or NMTCB preferred. Founded in 1956, Bakersfield Memorial Hospital was created to meet the needs of our community, and has grown from a small local facility to a large regional hospital serving all of Kern County. Today, we have more than 400 general acute beds, nearly 50 intensive care and cardiovascular recovery units, 13 state-of-the-art surgical suites, a full-service ER with nationally certified Stroke Center and the Central CA Heart Institute. In addition, we offer newly expanded birthing suites, a family care center, a 31 bed NICU, a 20 bed Pediatric unit, a full complement of diagnostic laboratory and imaging services and an outpatient surgery center. Other programs of note include our Women"s Services and a Center for Wound Care and Hyperbarics. We are proud to say that we are an "Equal Opportunity Employerâ??. "Bakersfield Memorial Hospital is now a tobacco-free campus.â??...

Nuclear Sales Engineer L08082014

Enjoy working in a fast-paced environment for a global company with a rich tradition and reputation for outstanding quality and service. ? Thrive in a competitive environment and is motivated and energized by the challenge of securing large projects up to and exceeding $1M. ? Have the ability to develop and cultivate business through diverse channels such as Users, Engineering Firms, OEM, Distributors and Contractors. ? Be capable of solving applications and developing standard and custom solutions to meet customers' needs. ? Build and maintain relationships with customers and relevant players to include third party influencers, potential partners, representatives, consultants, and/or multi-lateral agencies. Requirements ? Authorization to work in the US (no sponsorship) ? A technical degree (bachelor's and above), in engineering or science (engineering such as mechanical, chemical, nuclear, mining or science such as chemistry, biology, physics, math, etc.) Also considered: Graduation from the U.S. Navy Nuclear Power School (coupled with a 4 year degree) or equivalent experience of 3-5 years. ? The overwhelming desire and drive necessary to be among the very best technical sales engineer in the industry. ? A competitive spirit (i.e. the drive and desire to want to out-think, out-wit and out-smart the competition) ? Be someone who isn't afraid to get his/her 'hands dirty' in an industrial account. ? Have an 'extroverted personality', i.e. you like to get to know people and have the ability to build quick, strong alliances and business relationships with people at all levels in the organizations on which you'll be calling. ? One who likes to work hard and play hard? ? One year's sales experience, at a minimum, as a top-notch salesperson involving some type of technical, value-added sale (Ex: Materials, pumps, motors, chemicals, monitoring equipment, pressure vessels, heat exchangers, HVAC, remediation, construction services, boilers, process machinery, etc.). OR: (2) A strong desire to move from in-plant process or project engineering to being an engineering sales professional OR: (3) You are just getting out of the military. #CB...

Contractor Buyer - Nuclear Utility

*The link with the exact job code 7728 will direct you to our site to apply:...

Project Control Specialist (Nuclear)

Johnson Service Group is currently recruiting for an experienced, Project Control Specialist at Sequoyah Nuclear Plant near Chattanooga, TN. This role will perform developmental assignments of increasing responsibility in work planning and project control including status, variances, progress, indicator tracking and control changes for nuclear plant projects or programs. RESPONSIBILITIES INCLUDE: ASSISTS IN THE ANNUAL AND PROJECT LIFE CYCLE PLANNING PROCESS FOR TREND ANALYSIS, COST/SCHEDULE FORECASTS, CASH FLOWS, BUDGET ADJUSTMENTS AND PROJECT PRIORITIZATION SUPPORTS PREPARATION OF SUMMARY & DETAIL LEVEL REPORTS & TREND ANALYSES AS REQUIRED TO KEEP ORGANIZATION PROGRAM/PROJECT ENGINEERS AND MANAGERS AWARE OF THE IMPACT OF FORECASTED OR ACTUAL CHANGES TO THEIR BUDGETS, SPEND PLANS, AND SCHEDULES DEVELOPS GOOD COMMUNICATION AND COORDINATION SKILLS TO INFLUENCE THE GENERAL MANAGEMENT OF PROJECTS ASSISTS PROJECT TEAMS BY PARTICIPATING ACTIVELY IN LOGIC SEQUENCE EVOLUTION, PREPARING SCHEDULES, ESTIMATES, ECONOMIC EVALUATIONS, PROJECT COST/BENEFIT ANALYSIS, AND PROJECT APPROVAL PACKAGES SUPPORTS PROCESSES INCLUDING PROJECT CHANGE REQUESTS, LESSONS LEARNED, WORK AUTHORIZATION, WORK MANAGEMENT, AND PROCESS IMPROVEMENT REVIEWS CONTRACT COSTS AND REPORTS VARIANCES. SUPPORTS DEVELOPMENT OF RISK ANALYSIS REPORTS & RECOMMENDATIONS ASSISTS IN FIELD SUPPORT ACTIVITIES DURING OUTAGES AND CONSTRUCTION FOR ENGINEERING, CONSTRUCTION, PLANT, & PARTNERS MAY SUPPORT THE DEVELOPMENT/UPDATING OF SCHEDULING OR OTHER MANAGEMENT INFORMATION SYSTEM TOOLS INCLUDING DEVELOPING METHODS AND ESTABLISHING LINKS TO OTHER DATA SOURCES SUPPORTS THE PROCESS OF TRACKING THE PHYSICAL PROGRESS OF A PROJECT TO ENSURE WORK IS PROGRESSING AS PLANNED ASSISTS IN SELECTED PROJECT WALK-DOWNS TO VERIFY THAT PROGRESS REPORTED IS ACCURATE AND COSTS ARE CHARGED TO THE PROPER WORK ACTIVITIES ASSISTS IN THE PREPARATION OF PROJECT CLOSURE DOCUMENTS...

Nuclear Pharmacist / Saint Thomas West D&T Bldg / FT Days

Additional Job Information Title: Nuclear Pharmacist City, State: Nashville,TN Location: St Thomas West D&T Bldg Department: Pharmacy Nuclear Additional Job FT Days...

Nuclear Energy Associate Attorney

Ref ID: 00900-137475 Classification: Attorney-licensed II 4-9 yrs exp Compensation: DOE Robert Half Legal is seeking an associate attorney for a energy/nuclear energy practice in Atlanta. Ideal candidate will have 3-6 years of experience handling contracts regarding electricity and services related to generating fuel. Experience with FERC or familiarity with FERC and the energy field is required. For immediate consideration, please email your resume in word format to ....

CBRNE Specialist (Chemical, Biological, Radiological, Nuclear, and Explosion)

Overview: ServiceSource is a leading nonprofit disability resource organization with regional offices and programs located in eight states and the District of Columbia. We serve more than 14,000 individuals with disabilities annually through a range of innovative and valued employment, training, habilitation, housing and other support services. In addition to our support services, ServiceSource directly employs more than 1,500 individuals on successful government and commercial affirmative employment contracts. We invite you to be a part of our successful mission by applying for this position. Responsibilities: This position will require one to assist in all matters relating to Chemical, Biological, Radiological, Nuclear, and Explosion (CBRNE) detection and avoidance. Under general supervision of the DHS/CRDS Facility Engineer, provides operational, maintenance and engineering support on all facility equipment and building systems. Monitor compliance of all CBRNE screening proceedure. Maintain CRDS CBRNE consumable equipment, ensuring that Containment area workers are properly outfitted and equipped to perform their duties on a daily basis. Ensure that all CBRNE screening and detection technology present in the CRDS screening areas is properly maintained and operated. Perform all tests, maintenance, assist with repairs and replacement of all associated equipment that relates to HVAC, plumbing and electrical systems. Minimal maintenance, HEPA Filtration Systems, air handlers, computer room air conditioners, piping and fluid dynamics, pumps, valves, sound attenuation, ducting, insulation, domestic hot and cold water systems, hydronic heating systems, DDC Control systems, boilers, Split Air Conditioning Units, gas fired radiant heaters, fire suppression including FM-200 and Pre-Action Sprinkler Systems and alarm systems, mechanical monitoring and control systems, fuel systems, diesel engines, VAVs and VFDs. Coordinating routine and emergent vendor and internal maintenance on CBRNE related equipment. Maintain engineering based logistics program to track requirement support and ensure needed equipment and supplies are available as needed....

Nuclear Medicine Technol PRN

I. Position Summary: Responsible for the administration of radioactive material to patients for diagnostic, therapeutic, or research purposes. Supports and helps to achieve department goals. Performs all other duties as assigned....

Hazardous Waste Coordinator

Genzyme has pioneered the development and delivery of transformative therapies for patients affected by rare and debilitating diseases for over 30 years. We accomplish our goals through world-class research, collaboration with the global patient community, and with the compassion and commitment of our employees. With a focus on rare diseases and multiple sclerosis, we are dedicated to making a positive impact on the lives of the patients and families we serve. Genzyme's portfolio of transformative therapies, which are marketed in countries around the world, represent groundbreaking and life-saving advances in medicine. As a Sanofi company, Genzyme benefits from the reach and resources of one of the world's largest pharmaceutical companies, with a shared commitment to improving the lives of patients. Sanofi, an integrated global healthcare leader, discovers, develops and distributes therapeutic solutions focused on patients? needs. Sanofi has core strengths in the field of healthcare with seven growth platforms: diabetes solutions, human vaccines, innovative drugs, consumer healthcare, emerging markets, animal health and the new Genzyme. The Hazardous Waste Coordinator, under direct supervision of the Manager of Lab Support, is responsible for the following, in strict accordance with SOPs: ? Collects hazardous waste from satellite accumulation areas throughout each facility ? Maintains hazardous waste central accumulation area ? Ensures containers are compatible with waste, incompatible wastes are segregated, each container is properly labeled, and storage time limits are not exceeded. ? Conducts weekly inspections of hazardous waste satellite accumulation areas to assess compliance and make recommendations for corrective actions. ? Provides technical assistance and ad-hoc training to operations managers, Laboratory Chemical Safety Officers and to other Genzyme employees regarding waste management issues. ? Arranges for pick-up and most appropriate off-site treatment or disposal of waste by licensed vendor. ? Maintains all paper records (hazardous waste manifests) of waste shipments in full compliance with environmental regulations and Genzyme policy. ? Participates, as a trained member of Genzyme?s HazMat team, in spill prevention planning and hazardous materials emergency response. ? Enters data documenting nature, volume and source of all wastes collected and details of manifested waste shipments in a controlled database in support of (Company) pollution prevention efforts....

Environmental Compliance / Waste Coordinator

SET Environmental, Inc.?s mission is to become the premier environmental services company in the nation. We will accomplish this by assembling exceptionally talented professionals and focusing them on providing a service that exceeds our customer?s expectations. POSITION DESCRIPTION Provide compliance support for SET process to include waste management and storm water management Work directly with other contractors and employees on-site to provide guidance on wastes generated from projects or other activities Management of all waste pickup requests for the site Proper tracking and documentation of wastes generated to include dates and contacts for generation Waste packaging in compliance with associated regulations Preparation of bill of ladings, manifests and labels in compliance with associated regulations Complete waste profiling for site Prepare shipments to SET and other established waste vendors after determining best disposal method Answer all waste related inquires from the site and be the point of contact for leaking drum or other compliance related issues within the waste area Assist with site transition to large quantity generator Housekeeping in waste area to include daily inspections Spill Response upon demand Support other SET processes as needed Miscellaneous requests as needed...

Total Waste Manager

MPS Group, a managed professional services company whose solid core of business consists of innovative, single and bundled industrial services marketed and sold directly to our clients to help them grow while improving their ROI, has an immediate opening for a Total Waste Manager at the Chrysler plant in Belvidere, IL. General Description: Coordinates all onsite activities at client location or locations in relation to the storage, transportation and disposal of hazardous and non-hazardous wastes and other related services following Federal, state and local regulations. Supervises and plans activities of onsite personnel. Serves as liaison between client and vendors in relation to service issues. Maintains pre-established standards for safety and environmental issues. Typical Duties include: Comply with MPS Group?s management system policies and procedures. Coordinate logistics for transportation of hazardous waste, universal waste and non-hazardous waste from client site including profiling, scheduling, manifesting and physically loading bulk and drum loads. Assist with client and vendor financial obligations including invoicing, reporting and contracts. Promote culture of safety by ensuring site personnel are properly trained to perform assigned duties and comply with safety, environmental, Federal, state and local regulations. Proactively work with customers to establish reuse, reduction, and recycling options for waste streams. Track production, budget variance, and communicate with the Regional Manager. Identify out of scope work and work with the Regional Manager and client to cost and quote material prior to providing service. Conduct regulatory inspections applicable to the facility. Manage the contract per the current cost budget and see out internal/external cost savings. Supervises personnel necessary to fulfill requirements of contracts. Complete all other assignments made by management. Position Reports to: Regional Manager...

Waste Characterization, Disposal, and Reuse Manager

O'Brien & Gere has become more than an engineering solutions provider throughout our history of creating a better future since 1945. At the center of our story are clients ranging from advanced manufacturers to higher education, federal agencies, and municipalities. These clients trust us to deliver sustainable solutions and integrate innovative technology to solve the evolving energy, water, environmental and facilities challenges of today and tomorrow. By living our mission of People creating a better future by making a difference each day, we are improving natural and built environments for our clients, employees, and communities. And our story keeps getting better? Waste Characterization, Disposal, and Reuse Manager The Southeast Region of O?Brien & Gere is looking for a highly motivated and energetic candidate to perform waste characterization, management and disposal activities associated with demolition and decontamination of industrial facility in Wilmington, NC. After the initial project in Wilmington is complete, this position will used at Decon/Demo and other projects throughout the Southeast US. Some of the essential job functions of this position include but are not limited to, the following: Uses prescribed and established methods to perform specific and limited portions of scientific assignments. Follows assignments through a series of related detailed steps or processes Accurately and consistently completes assignments Applies basic scientific expertise in data collection and data interpretation Prepares reports, opinions and recommendations for the approval of the Project Manager concerning the direction of the project Gains and shares knowledge through participation in technical societies and/or attendance at internal and external programs, to a degree consistent with individual and divisional goals Manages and directs subcontractors Accurately completes DOT hazardous/universal waste manifest and labeling in accordance with applicable regulations Follows health and safety requirements and guidance...

Accounting Specialist

Job ID: 5335 Position Description: Who we are (Company Overview) AMETEK, Inc. (NYSE:AME) (www.ametek.com) is a publically traded leading global manufacturer of electronic instruments and electromechanical devices with annualized sales of $3.6 billion. AMETEK has nearly 14,000 colleagues at over 120 manufacturing locations around the world. Supporting those operations are more than 80 sales and service locations across the United States and in more than 30 other countries around the world. AMETEK is also a component of the S&P 500 Index. The Advanced Measurement Technology division of AMETEK, Inc. designs and manufactures detectors, signal processing electronics, software, and systems for industry, academia, and government requirements in the United States and internationally. The company specializes in the design and fabrication of spectroscopy systems for applications. It also provides applications software products, which include general purpose MCA software; counting laboratory and health physics applications; waste assay and nuclear safeguards; homeland security; and developer support. In addition, the division offers repair, technical support, and training services. It offers its products for use in applications, such as alpha spectroscopy, chemical weapons identification, counting laboratories, health physics, homeland security, in-situ gamma spectroscopy, neutron detection, nuclear safeguards and non-destructive assay, scientific research, waste assay, and whole body counting. The company was founded in 1960 and is based in Oak Ridge, Tennessee. The Opportunity (Position Description) The accounting specialist is a critical role in our organization to ensure adequate payments to employees and constituents. The role is open due to promotion. The role provides general support to Controller and Finance department. Some of the key responsibilities of this position include: ? Assist in the month end close process preparing journal entries & reconciliations as required ? Assist in quarterly reporting (MD&A) process ? Prepare monthly analysis of warranty, SG&A and service center costs ? Prepare miscellaneous P&L?s (BRIC, Commissionaire, Service) ? Reporting and administration of sales tax and royalty accounting ? Reporting of International Orders and Sales Actuals / Forecast ? Administer all domestic and foreign wire transfers ? R&D Cost Variance Analysis and Annual R&D Tax Credit reporting ? Work cross functionally within the organization ? Analyze Project/Specials accounting for ORTEC and SI ? Support organization and assist with forecasting, budgeting and reporting ? Support acquisition due diligence / integration as needed ? Prepare ad-hoc reporting...

Special Waste Sales Representative

We are currently seeking a Special Waste Sales Representative to manage special waste sales for our Angleton, TX landfill operations. The ideal candidate will be able to sell waste disposal and collection services to industrial accounts, transporters, consultants and emergency response companies with a focus on special waste. This person will develop and maintain relationships with client accounts focusing on customer satisfaction, quality of revenue and selling within customer base. ESSENTIAL DUTIES AND RESPONSIBILITIES: Identify, target and sell special waste disposal and collection services to industrial accounts, transporters, consultants, and emergency response companies. Seek and secure event work Develop and maintain business relationships with customers through periodic personal follow up, proactive customer service, prompt attention and resolution to concerns or issues and timely contract updates. Provide consultative services to both new and existing customers in the areas of special waste disposal services. Coordinate the approval and follow through of all service agreements. Increase revenue potential through selling additional services; improve and preserve quality of revenue through price initiatives to existing customers. Keep up with all federal, state and local environmental laws and regulations regarding special waste disposal and landfills. QUALIFICATION/REQUIREMENTS: Bachelors degree in business, marketing, Environment, Chemistry, science or related area 100% mandatory Three to five years sales and account management experience; One to two years experience selling to large accounts or complex contracts; and/or equivalent combination of education and experience. Waste, environmental, and/or analytical background experience Mandatory. Knowledgeable in federal, state, and local environmental laws and regulations. Able to prepare business and/or sales reports, correspondence; able to analyze and interpret business documents such as safety rules, operating and maintenance instructions and procedure manuals. Able to effectively present to groups of customers or employees of organizations. Successful candidates are those who seek to thrive in an environment of operational excellence and accountability. We offer excellent benefits including: medical, dental, vision, flexible spending account, long term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future". Waste Connections is an Affirmative Action/Equal Opportunity Employer (Minority/Female/Disabled/Veterans)...

Technical Training Manager-Join a Leader in Cancer Treatment

Outstanding opportunity to join a Leader in Cancer Treatment Technology Technical Training Manager Job Description: The Technical Training Manager will develop an internal training program and course materials principally designed for newly hired technical resources and partner personnel who will be working with the Proton Therapy Systems. The system includes a particle accelerator (Cyclotron), a beam shaping and monitoring system, X-ray and CT radiography, patient support and positioning, mechanical systems, a variety of user interfaces and applications, and an extensive safety system. The Technical Training Manager must be able to develop, maintain, and deliver training instruction working with existing subject matter experts drawing from company technical documentation. Approximately 20 ? 30% domestic travel is required; occasional international travel is possible. Duties and Responsibilities: The Technical Training Manager will develop and maintain the internal technical training program. Develop and maintain the strategy and mission for the internal technical training program for the Proton Therapy System Develop and maintain the curriculum for technical training relating to the various Proton Therapy subsystems. Prepare lesson plans, content and methods in cooperation with internal product and technology experts Responsible for the technical training of all new hires in the Service function and other functional groups as required Identify and help develop subject matter experts as instructors for the training program You will work with subject matter experts to develop troubleshooting aids for factory or field personnel Interact with functional organizations to develop course specifications Deliver classroom instruction to new and current employees on various system topics. Participates in effectiveness assessments of training programs and continuous improvement programs Remain current in product advancements, installation work instructions, test methods, and other procedures designed to produce and install the systems....

Sr Process Leader - Environmental, Waste Water Treatment and Utilities

Leads coaches and motivates an operational team to ensure high quality products are produced safely and cost effectively through maximizing operational efficiency and continuous improvement of a process or system. Leverages MillerCoors Manufacturing Way principles and best work practices which contribute to world class standards of operation through monitoring and evaluating SPQSCR to continuously improve performance. Builds and develops a team of technicians in the areas of technical and leadership capability. Develops team members to lead and manage and make sound decisions in all performance aspects of day-to-day operations. Prime accountability for Environmental regulatory compliance. Leads and provides strategy for all Environmental and Sustainability processes within the Brewery. Utilizes the MillerCoors Manufacturing Way principles and GEMS (Global Evaluation of Manufacturing Systems) to achieve world class standards of Environmental and Sustainability. Develops local strategies and tactics in alignment with the Brewery and ISC strategic plan. Is responsible for adhering to all rules, regulations, policies, programs and related MillerCoors Quality Management System including SQF, HACCP and GMP to ensure safety and quality of MillerCoors products. The above responsibilities apply to a process leader who leads and coaches a 24-hour operation of a functional area with limited to no managerial support on off-shifts or leads a large team of employees. This role also has additional experience requirements and expanded leadership requirements and responsibilities (see Job Responsibilities below)....

Vendor Manager, Waste Solutions

Making a World of Difference - At Ecova , we believe each individual, no matter the role, can make a difference for our clients , the environment and for themselves. Ecova is built on a strong foundation of integrity, community, leadership, persistence and urgency. Our highest goal is to be the market leading, trusted advisor to organizations driven to maximize results, reduce expenses, manage risk and improve environmental performance. Our focus is to grow results on saving resources for our clients ? from utilities to facilities . We apply data-driven insights ? from demand to impact ? to target inefficiencies and See More , Save More and Sustain More for our clients. We strive to deliver results and innovation through efforts of our unparalleled people to each and every client with whom we engage. We?re on the look-out for team players to work with us in serving as an integral extension of our clients to measure, analyze and improve resource management. Come join the Ecova family? together we can Make a World of Difference . Role Summary The Vendor Manager supports Ecova?s waste business by establishing and maintaining relationships with waste vendors. These vendors include waste and recycling haulers, equipment manufacturers, and complementary service providers. Role Description Develops and continually enhances vender performance metrics and corresponding scorecard template Builds and maintains effective long-term relationships with vendors; including expectation setting and price/contract negotiation Acts as a point of escalation for vendor related issues that arise through the course of business Provides problem-solving resources and solutions to complex vendor issues Prioritizes, develops and delivers vendor business reviews Establishes vendor service requirements by maintaining effective communications with vendors; visiting vendors; conducting surveys; forming focus groups; benchmarking best practices; analyzing information and applications, providing key performance indicators for senior management Focuses resources on continuous improvement by reviewing service quality results by studying, evaluating, and re-designing processes; monitoring and analyzing results; suggesting and implementing changes Continually identifies new service providers, and incorporates them into the Ecova vendor network Stays current on industry best practices by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations Responsible for bid procurement software and process May manage a support team of up to 5 people...

Regulatory Compliance Engineer

Transform Your Tomorrow?Today at Curtiss-Wright Flow Control At Curtiss-Wright (CW), you have the opportunity to transform the way our customers do business, as well as transform your career. Our entrepreneurial environment provides our employees with excellent experiences that enable them to develop their skills through stretch assignments and the opportunity to work with the best talent in the industry. At Curtiss-Wright, you will have the opportunity to contribute from day one. And?that?s just the beginning of how we help you transform your tomorrow: The Opportunity CW?s Electro-Mechanical Division is searching for a Regulatory Compliance Engineer to be based in Cheswick, PA with a minimum of a Bachelor of Science Degree in Engineering or Science from an accredited institution or recognized equivalent/work/field experience in radiological and environmental controls. EMD has a long-standing and distinguished reputation for the development, design, manufacture and qualification of critical-function, electro-magnetic machine solutions for the U.S. Navy and the commercial nuclear utility industry. Our historic accomplishments as a supplier of critical pumps, generators, motors and secondary propulsion systems make us uniquely qualified to aggressively tackle new projects and develop highly engineered solutions to meet our customers? needs and transform their businesses. Essential Responsibilities Works to develop and implement policies, manuals, procedures for various phases? of site, local, state and federal regulatory activities to ensure compliance with mandated regulations for radiological, safety and environmental controls. This work includes providing technical direction to site HPs techs on day to day activities with the Radiation Safety Officer. The engineer will direct, support, arrange and manifest shipments of radioactive materials and hazardous waste. The engineer will plan special work assignments, issue purchase orders, track costs and issue reports to support compliance. The engineer will process and maintain licenses and fees to ensure compliance. The engineer will provide radiation worker training for new and current workers in the controlled areas. Qualifications/Requirements BS in Engineering or Science from an accredited institution or recognized equivalent /work/field experience in radiological & environmental controls. Must have a broad knowledge, experience and personal achievements in the area of radiological controls Radiation worker training experience Experience as a qualified radioactive materials shipper Understanding of air, water and solids sampling techniques. Any experience with the following is a Plus: Navy ELT qualification DOT shipping qualification for radioactive materials DOT shipping qualification for hazardous materials Nuclear power plant work experience DOE radiological work experience Desired Characteristics Good communication skills (written and verbal) Be an innovative thinker and present theories/concepts in a professional manner Professionalism and commitment to quality and customer service What You?ll Find at CWFC Challenging Work ? The work we do at Curtiss-Wright Flow Control is not only challenging, but it is meaningful to our customers, our employees and the communities in which we live and work. Independence ? At Curtiss-Wright Flow Control, you have the independence to invent, create and innovate; and the opportunity to work on the most advanced technology in our industry. A Collaborative Environment ? The teamwork among our exceptionally talented people enables us to deliver some of the most advanced solutions to our customers. We Offer Curtiss-Wright Flow Control is proud to offer our employees a comprehensive total rewards package: Competitive pay Health and wellness benefits, including medical, dental, life insurance and more Savings opportunities for retirement, with an opportunity to become a shareholder Learning and development opportunities Recognition for your contributions...

Driver - Hazardous Waste (CPSDQ)

Equal Opportunity Employer: Minority/Female/Disability/Veteran Job Shift: 1st Shift Travel: Occasional 6-15% Employee Referral Amount: 500 Job Summary Our Hazardous Waste Driver is responsible for operating a hazardous waste transportation vehicle, usually an 18 to 26 foot box truck under 26000 GVW. After training, drivers will be required to operate a heavy-duty truck to perform assigned duties on primarily residential routes. Our drivers have safe driving records and possess at least a Class B commercial driver's license with airbrake and HazMat endorsements. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. Other minor duties may be assigned and may vary by location. Safely operate trucks in heavy traffic and other congested areas. Complete daily safety checks before operating the vehicle, as well as, performing pre-trip and post-trip inspections. Perform minor maintenance including, but not limited to, checking and adding fluids, checking tires and safety mechanisms, and performs other maintenance as it relates to vehicle inspection or safe operation. Operate hydraulic loading mechanism on truck. Load, unload, and transport Non-Hazardous or Hazardous material in a safe and efficient manner. Ensure loads are secure prior to transport. You must wear personal protective equipment (example seat belts, gloves, work boots and safety glasses etc.) at all times. Must be able to pass a DOT, Hazardous Materials and Respirator physical. Must be able to wear a full face cartridge respirator when needed. Our drivers, who have safe driving records, comply with all local, state, and federal transportation regulations and with company policy. Drivers are expected to communicate professionally with customers and dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner. The position routinely requires physical exertions such as repetitive lifting of items weighing up to 60 lbs and pushing, and pulling items that weigh up to 3000 pounds (using materials handling equipment) as part of their daily routine. This position will require you to work in all weather extremes including extreme hot or cold, wet or dry conditions. Supervisory Responsibilities This job has no supervisory duties. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Must have at least 2 years of previous experience operating a vehicle requiring a CDL in the past 7 years or military equivalent. B. Certificates, Licenses, Registrations or Other Requirements Must have a valid Class B commercial Driver's License with airbrake and HazMat endorsement in the state you are applying to work in. C. Other Knowledge, Skills or Abilities Required Lab pack experience. Must be at least 21 years of age or older. Legally eligible to work in the United States. Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, read product labels to determine the proper hazard classes and be able to make legible entries on reports and records. Successfully complete pre-employment DOT drug screen, physical, and background check, which will include previous employment check, criminal history and motor vehicle record review. Clean driving record. Ability to perform physical requirements of the position with or without reasonable accommodations. Must be computer literate in order to be able to check e-mail, print documents and input data into an excel matrix. Must also be able to operate and input data into a "smart phone" (currently using I-phone 4). Work Environment Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Required work hours may be up to the legal limits allowed and may require weekend and/or holiday work. Work hours will vary by route. Drivers must be able to read and understand a map, operate an electronic GPS navigation unit, complete daily driver logs as well as pre and post trip truck inspections. Benefits At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click. "Apply Now."...

Route Manager - All lines of waste business

Equal Opportunity Employer: Minority/Female/Disability/Veteran. Other Possible Location: Job Schedule: Job Shift: Standard Business Hours Pay: Travel: Occasional 6-15% Relocation: Job Summary Manages collection routes and driver/laborer performance on a daily basis. Essential Duties and Responsibilities include the following. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Organizes and schedules all necessary resources required to accomplish activities. Coordinates daily operational needs with Maintenance team. Plans, distributes, monitors, and follows-up daily route assignments to ensure customers are serviced per company standards and agreements. Manages the end-of-day check-in process, capturing and communicating key service, safety, and equipment issues. Monitors driver and laborer time and attendance, minimizing overtime and ensuring that drivers do not exceed limits established by regulatory agencies (e.g., 60 hour rule). Reviews weekly demand / volume for routes, determines potential gains from re-routing, and recommends re-routes to the routing specialist. Sets and monitors productivity, service, and safety targets for each route and driver. Assists with data collection and reporting required for incentive pay programs. Promotes a union free atmosphere and where appropriate, establishes collaborative relations with unions. Works with functional groups to resolve employee relations and labor relations issues. Acquires and coordinates temporary workers assigned to assist drivers on routes. Ensures that drivers comply with physicals, drug or alcohol tests, and training required by regulatory agencies. Conducts Root Cause Investigations for all injuries and incidents, ensuring consistent discipline and retraining. Visits customers and customer sites to evaluate and resolve safety issues, seeking service alternatives where appropriate. Establishes and maintains a clean, safe work environment in compliance with Company/Occupational Safety and Health Administration (OSHA) standards. Documents problem fixes and provides instructions to dispatch/service should problems recur. Communicates and follows-up on sales opportunities, problems at customer site, DVIR repairs, container swaps, and safety issues reported by drivers. Notifies customer service of delivery days for specific areas. Ensures set-up errors and missed pickups are reported and resolved. Documents and maintains records required by regulatory agencies such as the Department of Transportation. Reviews and audits documentation related to route operations on a daily basis (e.g., DVIRs, driver time and attendance, open tickets), following-up where appropriate. Supervisory Responsibilities This job has supervisory responsibilities for Drivers assigned to the position. This includes responsibility for employee performance reviews and feedback, scheduling time off, employee grievances or complaints, pay changes and job responsibilities. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Required: Associate's Degree or 2 years experience in transportation, logistics, or solid waste operations in which coaching, routing assessments and leading employees were requirements of the role. Preferred: Bachelor's Degree or 4 years experience in transportation, logistics, or solid waste operations in which coaching, routing assessments and leading employees were requirements of the role. B. Certificates, Licenses, Registrations or Other Requirements None required. C. Other Knowledge, Skills or Abilities Required None required. Benefits At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as Stock Purchase Plan, Company match on 401k plan, and more! Our employees also receive Paid Vacation, Holidays and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click, "Apply Now."...

Senior Electrical Engineer

Summary GAI is seeking a Senior Electrical Engineer to work in our Nuclear and Industry group. A successful candidate will have an ability to apply general Electrical Engineering knowledge while designing and analyzing power distribution, control, and automation systems. This position will be responsible for establishing and maintaining a collaborative working relationship with internal and external clients. Essential Duties and Responsibilities + Conduct various electrical engineering studies and analyses. + Develop technical documentation necessary for implementation of design changes of power and control systems to improve safety at the Nuclear Power Plants. + Develop Single Line, Three Line, wiring, protection and control diagrams, schematics, and equipment layout plans. This work includes coordination with CAD operators to develop quality drawings in accordance with GAI?s or clients? CAD Standards. + Apply general Electrical Engineering knowledge while designing and analyzing power distribution, control, and automation systems. + Establish and maintain a collaborative working relationship with clients. + Create project criteria and develop technical specifications and bill of materials. + Develop commissioning and testing specification. + Assist with development of scope of services and estimating costs for electrical projects. + Other duties as assigned....

Environmental Scientist / Waste Specialist

Conestoga-Rovers & Associates (CRA) provides comprehensive engineering, environmental consulting, construction, and information technology solutions for our clients. With more than 30 years of experience in providing high quality and responsive services, CRA has grown to over 90 offices and 3,000 employees working on projects worldwide. Conestoga-Rovers & Associates has an opening in our Houston, TX office for an Environmental Scientist / Waste Specialist , who aspires to become an active employee in a vibrant, well-established company. If you?re driven, fast track your career here Responsibilities Coordinate transportation and disposal activities including waste classification and profiling Specify and evaluate chemical data to make waste determinations, transportation & disposal arrangements and recommendations Manage individual streams (non hazardous, hazardous, recoverable, and universal waste) Preparation of shipping documents (Manifests, and/or Bills of Lading (BOL?s), labels, and Land Disposal Restriction (LDR) Shipment notifications Prepare annual and biennial reports for state and/or federal agencies...

Special Waste Sales Rep

Within a designated market, a Special Waste Sales Representative is responsible for identifying leads, proactively prospecting and selling special waste services to customers and/or designated agents. The Special Waste Sales Representative may sell event disposal and hauling services when a clear opportunity is present. The Special Waste Sales Representative is also responsible for building, maintaining and growing long-term relationships with these clients to grow the revenue base and meet and exceed the monthly targeted revenue growth objectives in support of the Company?s overall goals and objectives. The Special Waste Sales Representative meets regularly with contractors, prospective and existing clients in his or her assigned market area to deliver sales presentations, follow up with key decision makers and sell all special waste and other services, as appropriate. ? Identifies viable leads, manages prospects and sells special waste services offered by the division(s) to meet and exceed monthly established targeted revenue goals. ? Develops and implements sales and marketing action plans, including key objectives, in support of the sales and overall special waste goals of assigned landfill divisions. ? Generates and provides sales leads for permanent sales opportunities to the appropriate sales representative in the market to capture additional revenue. ? Completes contractual re-signs with existing customers to extend customer relationship and increase customer profitability where appropriate. ? Proactively communicates with, or responds to, customers in conjunction with Company pricing initiatives. ? Builds long-term relationships with contractors, prospective and existing clients in designated market. ? Develops and maintains an awareness of market behavior and competitive trends in designated market to anticipate changing customer needs; proactively manages customer base. ? Prepares and delivers sales presentations to grow existing client base; follows up with key decision makers; prepares sales contracts, including price quotes, credit terms and services. ? Maintains a thorough knowledge of the Company?s available services, lines of business, pricing structures and upsells additional services , as appropriate, to grow targeted revenue and contribute to Company goals and objectives. ? Meets regularly with Director, Manufacturing & Environmental Services, as appropriate to review sales activities and prospective customer calling activities. ? Tracks all prospective customer information on required reporting format. ? Maintains current knowledge of all federal, state and local environmental laws and regulations regarding special waste disposal and landfills; participate in company-sponsored training courses, meetings and discussions regarding the classifications and characterization of special waste. ? Participates in company-sponsored events and activities, as required, which may include trade shows and chamber of commerce events. ? Completes all required Customer Service Agreement (?CSA?), Customer Relationship Management (?CRM?) and other reports in a complete, accurate and timely manner. ? May be responsible for collection activities, as required. ? Responds to service cancellation calls, if necessary, and ensure compliance with appropriate escalation policy. ? Performs other job-related duties, as required. The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, genetic information, or any other characteristic protected by applicable law....

Hazardous Waste Technician

Hazardous Waste Technician The Hazardous Waste Technician is responsible for performing all environmental functions of a site?s Chemical Management Operations as specified in the SOW. This may include insuring compliance with training, providing reporting, etc. Responsibilities / Duties: Ensure the customer?s site compliance with all applicable environmental regulations and guidelines Ability to Drive a forklift legally Collects, labels, transports (internally only), and/or handles hazardous waste as a primary part of job Review the regulations and environmental management requirements (reference letters, etc) and determine site applicability and impact Performs all chemical storage and waste required inspections including satellite accumulation areas, oil/chemical and hazardous waste storage yard inspections, and container storage inspections. Ensures the required documentation for all inspections is completed and maintained as required Establish processes to identify potential noncompliant issues Address noncompliance items immediately whenever possible and implement irreversible corrective action Responsible for packaging, labeling, and marking hazardous waste according to DOT and EPA regulations Obtain training to respond to facility Spill incidents, 24/7 as required Calls the emergency line when a spill, leak, or other emergency occurs Emphasizes the continuing minimization of hazardous waste generation by effective housekeeping and good management practices Responsible for overall housekeeping of chemical storage areas Actively resolve environmental issues with internal constituencies and elevate issues to the supervisor level if the issues become problematic and persistent Actively participate in plant and regional meetings Gather data, analyze, interpret, and prepare technical reports Interface with customer Environmental Audit Team and Legal Staff, as required Meet with plant management staff (including Plant Manager, Manufacturing Manager, FAM, and SUM) as often as necessary to ensure customer satisfaction and the achievement of Business Plan goals and objectives Provides Chemical Delivery and inventory at multiple storage locations on site Refill and insure proper labeling for secondary containers Manages a Max/Min sheet for each storage location Supports Waste Manager in various projects Support the customer's Environmental Management System (EMS) to maintain ISO 14001 certification Utilize and maintain an Environmental Calendar to ensure timely conformance with all site environmental requirements Assist in maintaining cost controls, and drive Productivity Improvement initiatives Identify and promote actions to drive customer Pollution Prevention goals and activities such as reducing on site non-recycled waste, etc Provides chemical procurement services with ChemicoMays ERP system Provides weekly physical verification of inventory and reconciles with ERP system Provides Billing to the facility and ChemicoMays identified personnel at scheduled intervals Oversees general operation of the program On-Call 24 / 7 Other duties as required...

Quality Engineer

POSITION PURPOSE: Utilize engineering talents to support new product, reduce cost, eliminate waste, and minimize opportunities for defects. Assists Quality Manager by supporting the Quality Management System and managing the PPAP process required by external suppliers. PRIMARY ACTIVITIES: Customer. Care - provide leadership in communication and interaction with customers in order to ensure customer expectations are continually met or exceeded. Participate in Advanced Product Quality Planning (APQP) activities in support of new product introduction that includes, review of customer engineering standards and drawings through the demonstration of understanding of product development lifecycles, design change and document change control, process verification and validation methodologies, manufacturing / production process control methodologies, and servicing to ensure successful new product launches. To Champion the cross functional team during Advanced Product Quality Planning (APQP) in the development of Process Flow, PFMEA, Control Plan, SPC and Measurement System methodologies and documentation. Focus must include optimizing the part and/or process in an effort to reduce cost, eliminate waste, and minimize opportunities for defects. Use advanced statistical methods like Regression Analysis, Hypothesis Testing and Design of Experiments to assist in the identification and validation of critical process and/or product characteristics in an effort to meet customer requirements in the most economical and efficient methods for our organization. Manage the process for communicating Production Part Approval Process (PPAP) requirements to our suppliers as well as final PPAP submittals to the customer for new and revised product. Participate in the review and analysis of Cost of Poor Quality (COPQ) metrics and participate in the initiation of engineered solutions to address reject PPM both external and internal. Are required to be familiar with existing manufacturing equipment and processes and participate, when applicable, in engineering solutions for optimization of manufacturing process efficiency and effectiveness. Implementation of Lean / Six Sigma principles to improve our overall operations and decrease costs associated with our products. To support our Quality Management System by participating in internal and external ISO 9001/AS 9100, NADCAP and Nuclear process based audits and to support the ongoing maintenance of our certification through the implementation of new requirements as defined by the international and / or customer specific standards. Assist and/or lead external audits and related activities as it pertains to Supply Chain Management / supplier selection, approval, and development....

Waste Water Operator

The leading provider of comprehensive water and wastewater services to municipal and industrial customers Veolia Water Solutions & Technologies North America (VWS NA) Industrial Solutions is currently seeking a Waste Water Operator to work in the Fairmont West Virginia area. Veolia Water Solutions & Technologies North America (VWS NA) Industrial Solutions is a full-service industrial water management company with a focus on a cost effective blend of service, chemistry and equipment technologies. With our balanced process management approach to water-related issues, we are able to create and implement innovative, sustainable, custom water solutions that reduce the overall cost of operation and compliance. Veolia Water Solutions & Technologies (VWS), an industry leader in providing water and wastewater solutions to industrial and municipal customers. VWS is a Veolia Water company. Veolia Water provides water services through public-private partnerships and industrial outsourcing agreements and is comprised of the top water professionals in every corner of the globe. Our parent company, Veolia Environnement (VE), is a world leader in environmental services. VE is based in France and is comprised of four business segments that serve the environmental needs of customers globally: Veolia Water, Veolia Environmental Services, and Veolia Energy. The Waste Water Operator is responsible for controlling treatment plants machines and equipment to purify and clarify water for permitted industrial uses. This position will provide back up support to current Waste Water Operator's on staff; this position may work at various client sites in the United States and also may work varying shifts. Essential Duties and Responsibilities: Operates and controls electric motors, pumps, and valves to regulate flow of water into treatment plant. Collect and test water samples to determine concentration levels and impurities. Perform all scheduled maintenance, service, and new installations of water treatment equipment. Responsible for accurate record keeping of client data such as residual content of chemicals, water turbidity, and water pressure. Comply with all client safety parameters. May be responsible for compiling data for Environmental Protection Agency. Coordinate with other operators throughout customer plant in order to maintain the plants water treatment equipment. Consult with customers in the operations of their wastewater plant to determine the best treatment for their wastewater. Coordinate with Veolia purchasing department to order wastewater treatment supplies, such as equipment and chemicals, in order to maintain the client�s wastewater treatment equipment. Compile data for monthly operating report to in house management and client management. Responsible for training client�s personnel in the proper operating procedures for wastewater treatment equipment. Troubleshoot problems within client�s wastewater treatment equipment and coordinate repairs as necessary. Advise client on the appropriate methods for hazardous waste spill clean ups, recycle programs, energy savings programs, and water usage reduction....

Industrial Waste Water/ Water treatment Chemical Sales Rep - Detroit

Waste Water/Industrial Water Treatment Chemical Territory Sales Manager Detroit, MI territory Fast growing chemical manufacturer is looking for an experienced territory sales manager for sales and service of waste water and industrial water treatment chemicals. Manager will focus on new sales into mid-sized industrial and metal related markets in a territory that covers the general Detroit, MI area. Manager will assume responsibility of some existing accounts ,but will have over 50% of time for new account development and sales. Company focuses on chemicals used in industrial waste water, boiler and cooling tower applications, with an emphasis on waste water (Industrial, not municipal) . Some metal treatment applications as well. NO OVERNIGHT TRAVEL REQUIRED. Company offers a base salary of 70-90K, excellent commission/bonus program , company car, expenses, home based office (cell phone/Laptop computer) 401K and excellent benefits package....

Maintenance Waste Water Technician (20121887)

? Perform all work as assigned while adhering to high standards associated with safety and workmanship. ? Responsible for the safe and dependable operating condition of all equipment in the waste water treatment system. ? Performs all required waste water analytical testing and reporting (COD, TSS, pH, N2, Phosphorous). ? Maintains all records, logs and summary documents associated with the operation and analytical tests in a professional and ethical fashion. ? Set-up, troubleshoot and repair of liquid pumps, valves, air pumps, dissolved-air-flotation (DAF) equipment and all other water treatment system equipment. ? Dismantling and re-assembly of pumps, valves, strainers, etc to perform repairs, cleaning and lubrication according to established maintenance schedules. ? Testing and troubleshooting of 11 0 / 2 3 0 / 46 0 volt electrical equipment including motors, starters, relays, timers, panels, breakers, conduit and wiring. ? Able to read, interpret and use Electrical Control schematics for trouble shooting purposes. ? Minor programming and troubleshooting of PLC's. ? Understands and adheres to established safety programs (ex! lock out/tag out, ladder safety, etc). ? Communicates effectively at all levels in the maintenance and operating departments. ? Communicates effectively with outside agencies as required. ? Provides rapid response when equipment malfunctions. ? Ensures the water treatment plant is maintained in compliance to electrical and fire regulations. ? Assists in coaching and training of maintenance and operating personnel. ? Maintains high level of housekeeping, orderliness and cleanliness within water treatment plant ? Schedules and oversees outside support services and activities (ex/ Torvac sludge removal, H- 0 - H chemicals, EMT sampling) as is required....

562582: Health Plan Fraud, Waste & Abuse Compliance Consultant - Austin TX

Bring us your experience, your head for strategy, your strength with relationships and your eye for opportunity. In return we offer an unmatched place to grow and develop your career among a richly diverse group of businesses driven by the power and stability of a leading health care organization. Come help us heal and strengthen the health care system as you do your life's best work.(sm) UnitedHealthcare Community & State, part of the UnitedHealth Group family of companies, is looking for an experienced Health Plan Fraud, Waste & Abuse Compliance Consultant to join our dynamic Compliance team. Things are exciting at UHG as we are experiencing unprecedented growth, and looking for someone with the right stuff for our team at our Austin TX location. The Compliance Consultant is an individual contributor role responsible for Fraud, Waste and Abuse and specific research leading to best practice policy implementation and vendor monitoring to drive problem/process resolution for our Texas Medicaid Healthplan. Ideal candidates will have experience in a Texas Medicaid FWA, regulatory or compliance role, will have experience working with state level regulators, will have experience working with OIGs, and will have strong project management experience and experience working in a matrixed environment. Primary Responsibilities: Works to ensure that internal processes are executed, especially as relate to intersegment responsibilities, for fraud, waste and abuse (FWA) vendors' instances of health care FWA by medical profession or insured member Acts as Health Plan FWA subject matter expert for Federal and local FWA regulations and subsequent regulatory policy and process implementation. Responsible for keeping current with new federal guidelines and state proposed guidelines. Ensures that changes are included in education and carried out by various vendors Serves as Health Plan FWA trainer. Coordinates and supports implementation of Fraud training and educational programs with the appropriate business areas and vendors As necessary, may conduct onsite provider claim and/or clinical audits to gather and analyze all information and documents related to an investigation Acts as Health Plan FWA vendor liaison, i.e., conducts reviews on their policies to make sure they are compliant; ensures that vendor processes are executed appropriately; that timelines are met per regulatory fulfillment; sets boundaries for vendors so that accountabilities are clear Serves as Office of Inspector General's and Attorney General Office's FWA liaison; acts as a backup to Compliance Director to ensure that timelines and requests are met Develops and maintains fraud-related policies, e.g., documents the education and hand-offs for the Health Plan from Corporate as required to meet contractual obligations Ensures procedures are established to support timely communication and education regarding the fraud program Ensures that procedures are in place to review and report possible violations in accordance with the reporting requirements as outlined in the FWA Plan. Reviews vendors to make sure that all aspects of FWA are managed and policies are developed where gaps are identified...

Senior Waste Water Treatment Engineer

Senior Engineer A rapidly growing technology company with extensive experience in design, fabrication and operation of water and wet waste treatment equipment for government and commercial clients, is looking for Senior Engineers. Job duties include supporting liquid waste operations at commercial and DOE facilities in the Knoxville area. Senior Engineers will be responsible for designing and managing equipment, systems and engineering/operations support staff....

Planning Engineer

Planning Engineer - BWSR - Idaho Falls, Idaho BWSR performs decontamination and decommissioning services under a multiple year contract. This position is responsible for managing complex, multi-year projects through identification and completion of critical path and parallel work activities to achieve optimum performance. Responsible for implementing all project management protocols for D&D projects assigned to the Project Manager. This position is an exempt position responsible for formulating schedules and coordinating task priorities as established by the customer. This individual must work closely as a team member with Operations Supervisors, Radiological Controls Supervisors, Environmental Engineers, and Radiological Engineers to support a consistent approach to the planning of project managed work. The Planning Engineer will be competent in the field of various scheduling software programs (including Primavera 6) used at the Naval Reactors Facility (NRF). Interfacing with customer planning personnel, and overall planning of work tasks to ensure preparations, execution, and closeout documentation of work are satisfactory. A project management plan, including long-range schedules, will also be maintained as requested by the customer. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. Citizenship with (no dual citizenship) ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation and previous employment reference verifications....

Senior Corrosion Engineer

Company & Business Area Description Driven by our purpose of safeguarding life, property and the environment, DNV GL enables organisations to advance the safety and sustainability of their business. We provide classification and technical assurance along with software and independent expert advisory services to the maritime, oil & gas and energy industries. We also provide certification services to customers across a wide range of industries. Combining leading technical and operational expertise, risk methodology and in-depth industry knowledge, DNV GL empowers our customers? decisions and actions with trust and confidence. We continuously invest in research and collaborative innovation to provide customers and society with operational and technological foresight. Originated in 1864, DNV GL operates globally in more than 100 countries with our 16,000 professionals dedicated to helping our customers make the world safer, smarter and greener. DNV GL is the leading technical advisor to the global oil and gas industry. We enable safe, reliable and enhanced performance in projects and operations. We provide consistent, integrated services within technical and marine assurance and advisory, risk management advisory and offshore classification. Together with our partners, we drive the industry forwards by developing best practices and standards. Our people combine industry expertise, multi-disciplinary skills and innovation to solve complex challenges for our customers. Local Unit & Position Description Normal 0 false false false EN-US ZH-CN AR-SA DefSemiHidden='true' DefQFormat='false' DefPriority='99' LatentStyleCount='267'> UnhideWhenUsed='false' QFormat='true' Name='Normal'/> UnhideWhenUsed='false' QFormat='true' Name='heading 1'/> UnhideWhenUsed='false' QFormat='true' Name='Title'/> UnhideWhenUsed='false' QFormat='true' Name='Subtitle'/> UnhideWhenUsed='false' QFormat='true' Name='Strong'/> UnhideWhenUsed='false' QFormat='true' Name='Emphasis'/> UnhideWhenUsed='false' Name='Table Grid'/> UnhideWhenUsed='false' QFormat='true' Name='No Spacing'/> UnhideWhenUsed='false' Name='Light Shading'/> UnhideWhenUsed='false' Name='Light List'/> UnhideWhenUsed='false' Name='Light Grid'/> UnhideWhenUsed='false' Name='Medium Shading 1'/> UnhideWhenUsed='false' Name='Medium Shading 2'/> UnhideWhenUsed='false' Name='Medium List 1'/> UnhideWhenUsed='false' Name='Medium List 2'/> UnhideWhenUsed='false' Name='Medium Grid 1'/> UnhideWhenUsed='false' Name='Medium Grid 2'/> UnhideWhenUsed='false' Name='Medium Grid 3'/> UnhideWhenUsed='false' Name='Dark List'/> UnhideWhenUsed='false' Name='Colorful Shading'/> UnhideWhenUsed='false' Name='Colorful List'/> UnhideWhenUsed='false' Name='Colorful Grid'/> UnhideWhenUsed='false' Name='Light Shading Accent 1'/> UnhideWhenUsed='false' Name='Light List Accent 1'/> UnhideWhenUsed='false' Name='Light Grid Accent 1'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 1'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 1'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 1'/> UnhideWhenUsed='false' QFormat='true' Name='List Paragraph'/> UnhideWhenUsed='false' QFormat='true' Name='Quote'/> UnhideWhenUsed='false' QFormat='true' Name='Intense Quote'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 1'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 1'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 1'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 1'/> UnhideWhenUsed='false' Name='Dark List Accent 1'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 1'/> UnhideWhenUsed='false' Name='Colorful List Accent 1'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 1'/> UnhideWhenUsed='false' Name='Light Shading Accent 2'/> UnhideWhenUsed='false' Name='Light List Accent 2'/> UnhideWhenUsed='false' Name='Light Grid Accent 2'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 2'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 2'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 2'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 2'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 2'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 2'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 2'/> UnhideWhenUsed='false' Name='Dark List Accent 2'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 2'/> UnhideWhenUsed='false' Name='Colorful List Accent 2'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 2'/> UnhideWhenUsed='false' Name='Light Shading Accent 3'/> UnhideWhenUsed='false' Name='Light List Accent 3'/> UnhideWhenUsed='false' Name='Light Grid Accent 3'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 3'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 3'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 3'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 3'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 3'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 3'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 3'/> UnhideWhenUsed='false' Name='Dark List Accent 3'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 3'/> UnhideWhenUsed='false' Name='Colorful List Accent 3'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 3'/> UnhideWhenUsed='false' Name='Light Shading Accent 4'/> UnhideWhenUsed='false' Name='Light List Accent 4'/> UnhideWhenUsed='false' Name='Light Grid Accent 4'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 4'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 4'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 4'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 4'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 4'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 4'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 4'/> UnhideWhenUsed='false' Name='Dark List Accent 4'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 4'/> UnhideWhenUsed='false' Name='Colorful List Accent 4'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 4'/> UnhideWhenUsed='false' Name='Light Shading Accent 5'/> UnhideWhenUsed='false' Name='Light List Accent 5'/> UnhideWhenUsed='false' Name='Light Grid Accent 5'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 5'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 5'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 5'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 5'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 5'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 5'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 5'/> UnhideWhenUsed='false' Name='Dark List Accent 5'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 5'/> UnhideWhenUsed='false' Name='Colorful List Accent 5'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 5'/> UnhideWhenUsed='false' Name='Light Shading Accent 6'/> UnhideWhenUsed='false' Name='Light List Accent 6'/> UnhideWhenUsed='false' Name='Light Grid Accent 6'/> UnhideWhenUsed='false' Name='Medium Shading 1 Accent 6'/> UnhideWhenUsed='false' Name='Medium Shading 2 Accent 6'/> UnhideWhenUsed='false' Name='Medium List 1 Accent 6'/> UnhideWhenUsed='false' Name='Medium List 2 Accent 6'/> UnhideWhenUsed='false' Name='Medium Grid 1 Accent 6'/> UnhideWhenUsed='false' Name='Medium Grid 2 Accent 6'/> UnhideWhenUsed='false' Name='Medium Grid 3 Accent 6'/> UnhideWhenUsed='false' Name='Dark List Accent 6'/> UnhideWhenUsed='false' Name='Colorful Shading Accent 6'/> UnhideWhenUsed='false' Name='Colorful List Accent 6'/> UnhideWhenUsed='false' Name='Colorful Grid Accent 6'/> UnhideWhenUsed='false' QFormat='true' Name='Subtle Emphasis'/> UnhideWhenUsed='false' QFormat='true' Name='Intense Emphasis'/> UnhideWhenUsed='false' QFormat='true' Name='Subtle Reference'/> UnhideWhenUsed='false' QFormat='true' Name='Intense Reference'/> UnhideWhenUsed='false' QFormat='true' Name='Book Title'/> DNV GL ? Oil & Gas?s Corrosion group is seeking a Senior Engineer to join our team. This position may be based out of our Dublin, Ohio or Houston, Texas offices. Tasks May Include Responsibilities will include development and execution of materials, corrosion and electrochemistry programs particularly in the area of power generation, pipelines, chemical process industry, nuclear waste. Mentor junior staff and technicians on project execution and development. Review project work and provides technical guidance to lower level staff and oversee project delivery and budget requirements. Perform more complex project tasks and operates fully independently in the discipline Manage and direct work and participation in work executions, i.e. including SHE, project budget, schedule and client expectations. Foster relationships with clients and other DNV office, globally and nationally Proposal and report writing Other duties and tasks as assigned...

Interested in joining a team that works on projects that matter?

Interested in joining a team that works on projects that matter? Kurion creates technological solutions to minimize and stabilize nuclear and hazardous waste for safe, secure and permanent disposal. We are a diverse organization with talented individuals in engineering, science, technology and research working on challenging projects worldwide and are recruiting candidates for the following positions: Electrical Engineer - Requires a BSEE with a minimum of 5 yrs. exp. I&C - Requires a BSEE, with a min. of 5 yrs. exp. HVAC Engineers - Requires a BSME with ASME AG-1 experience. Min. of 10 yrs. exp. Safety and Health Manager - Master's degree highly preferred; BA/BS degree in Health Physics, Industrial Hygiene or Safety required (a relevant BS/BA degree plus significant experience may be an acceptable alternative). Min. of 7 to 10 years of experience in Health Physics, Industrial Hygiene, or Industrial Safety in a supervisory role. Kurion offers a competitive compensation and benefits package including medical, dental, vision, disability, life insurance, paid time off and 401(k). To apply please e-mail your resume to: careers@ kurion.com Kurion is an Equal Employment Opportunity Employer http://www. kurion.com/ Source - Tri-City Herald...

Principal/Senior Quality Engineer

Mallinckrodt Pharmaceuticals is an independent, publicly traded, $2.2 billion company. A market leader in specialty pharmaceuticals and global medical imaging, we develop, manufacture and market products that help diagnose serious illnesses and treat pain. Our specialty pharmaceuticals business encompasses branded and generic products as well as the active pharmaceuticals ingredients (APIs) used to make prescription drugs. Our global medical imaging business provides contrast media and delivery systems and nuclear medicine products. Already a global healthcare leader, we?re also becoming more internationally focused to continue helping patients worldwide. Emerging markets factor highly in our growth plans, strengthening a reach that stretches across North America, Latin America, Europe, the Middle East and Africa, Asia Pacific and Japan. Today we are the largest US supplier, by prescription, of opioid pain medications. We?re among the top 12 generic pharmaceutical companies in the US. And we?re a leading manufacturer of APIs and products for diagnostic procedures. It?s an exciting time to be here. We have an entrepreneurial spirit that?s defined by five hallmarks: high-performing, competitive, collaborative, engaged and trustworthy. There?s a strong sense of purpose, too, as we?re all focused on helping patients. Some 5,500 people around the world are now driving forward a company working to reveal and relieve disease for a healthier world. Find out how much you?ll gain if you?re one of them. The position provides complete oversight as product steward for assigned contract manufacturing organizations (CMO) or assigned product lines. The oversight includes complete signature authority, with responsibility for escalating high risk issues to management. The position also acts as a consultant to management regarding compliance issues and may lead very large projects that could cross site or divisional lines. The incumbent will coordinate compliance activities / projects with key CMO and Mallinckrodt groups. ESSENTIAL FUNCTIONS : ?Provide oversight for assigned CMOs and/or product lines, including but not limited to: o Change management o Investigations (process, complaint, and laboratory) o Product release (oversight for high volume products, and performing release for low volume) o Annual Product Review o Master documents (batch records, methods, labels, etc?) o Validation protocols and reports o Stability data review / stability coordination o Audit results and assisting audit teams as assigned o CAPA ? Identify, develop and execute project plans and timelines to achieve desired results ?Lead continuous improvement efforts for projects identified at the CMOs or within Mallinckrodt ?Participate actively on cross-functional support and process improvement teams ?Seek to identify and execute safety improvements and waste minimization opportunities ?Serve as leading technical expert in one or more key quality or compliance areas ? Assist in the application of appropriate quality technology tools to establish and maintain process capability and to resolve process deviations and product failures ? Create, approve, and implement quality system procedures associated with the product realization process as well as procedures associated with CMO management and oversight ? Plan, execute and follow up on CMO site visits due to identified issues, validation/transfer activity or as routine periodic visits ? Assemble information, develop the decision and rationale for material review board (MRB) and field alert report (FAR) decisions, including follow up investigation and summary documents for both FAR and MRB ? Support CMOs and Mallinckrodt with FDA and other regulatory body investigations and inquiries as needed Support scorecard development, maintenance, reporting and action / project development from scorecards. EOE...

GeneralUS Department of Energy Carlsbad Field OfficeJob

General US Department of Energy Carlsbad Field Office Job Annoucements Job Oppotunities - Carlsbad NM Assistant Managers Nuclear Safety Safety Systems Oversight Mine Safety Facility Oversight Facility Representatives Federal Project Director Technical Training Public Affairs How to Apply Apply through USA Jobs Web Site https://www.usajobs.gov For more information on CBFO and Waste Isolation Pilot Plant http://www.wipp.energy.gov/index.htm Apply Now Source - El Paso Times - El Paso, TX...

PLANNING COORDINATOR / PRODUCTION PLANNER

This position reports to the Materials Manager. The Planning Coordinator performs the day-to-day production planning activities as well as longer-term coordination and direction. The Willimantic, CT facility produces specialty wire and cable for the industrial, marine, military, nuclear, and transit markets. As the facility continues to aggressively improve its materials systems, there is a need for a Planning Coordinator to help lead the lean transformation efforts and ensure optimum utilization of manpower and materials. Principle Functional Responsibilities : Coach and lead continuous improvement efforts within the cell, participate on and conduct continuous improvement activities Coordinate the activities of manufacturing departments to ensure that work is produced on schedule in a balanced flow method fully utilizing essential lean tools, such as Kanban, Heijunka, supplier managed inventories, etc. Develop and implement lean strategies for improving the operation and inventory optimization including pull systems, JIT, cellularization, set-up reductions, etc. to deliver reduced product cost, improve quality, minimize waste and drive down cycle times Drive cost reduction and productivity through materials design initiatives and purchase price variance Support material procurement and working capital optimization through the use of lean tools such as e-commerce, consignment and supplier managed inventory Coordinate the maintenance of manufacturing data systems in formal materials resources planning tools necessary to support the manufacturing process and provide information for budgeting, capacity and planning processes Forecast, plan and develop plans, measures and controls for establishing inventory mix requirements and levels of materials, components, and products in all stages of production and distribution Develop and maintain capacity reports/schedules for the assigned departments and cells that include all resource considerations Prepare performance reports on key performance parameters to include, schedule attainment, material turns, working capital level, etc. Perform other tasks as needed in support of achieving the highest level of customer satisfaction at an optimum cost Supervision Scope : He or she will be responsible for effectively managing cross-functional relationships with other departments to support effective materials usage, flow and productivity improvement initiatives. Desired Background : 5+ years experience in a team based manufacturing environment Strong MS Office and MRP systems background Lean Manufacturing experience desired. Proficient utilization of Lean Tools APICS certification Education : Bachelors degree in operations management, or related field...

Operations and Maintenance Technician I-V - Arlington Valley

Star West Generation is an innovative independent power producer focused on clean, reliable, and efficient power generation serving North American markets. We are currently recruiting for an Operations and Maintenance (O&M) Technician for our Arlington Valley location. The Arlington Valley Energy Facility is a 580 MW natural-gas fired combined cycle generating facility located near Arlington, AZ. The facility consists of two GE 7FA+e combustion turbines, two single reheat HRSGs with duct firing capability, and one GE D11 steam turbine generator. The facility is equipped with two Selective Catalytic Reduction (SCR) systems and dry low-nitrogen oxide gas turbine combustion technology for emissions control. Operations and Maintenance Technician I-V - Arlington Valley As the O&M Technician, you will assist in the safe and efficient operation of the power plant and the supporting equipment and systems, as well as carry out all routine water chemistry analysis, inspect and monitor operating components and report plant status. Your primary functions will include assisting in start-up, shut-down and normal operations of power plant systems, operating major auxiliary apparatus such as air compressors, boiler feedwater treatment systems, generator cooling systems, boiler feedwater and condensate systems, and locally controlled electrical and mechanical equipment. Additionally, you will perform operating tests and inspections, make minor repairs and adjustments to equipment assigned to achieve proper operating conditions, maintain logs as assigned and report any abnormal or irregular conditions that develop during the progress of the work and take corrective measures within the scope of operating instructions. You will also execute orders from the Control Room Operator as well as assist maintenance personnel during maintenance periods....

Industrial Machinist / Millwright

Gets Results? Maintenance Excellence? Committed to Safety? Solid Experience working in an Industrial Environment?Does this describe you? Honeywell International is a $40 billion diversified Fortune 100 leader with more than 131,000 employees in 100 countries around the world. We invent and manufacture technologies that address some of the world?s toughest challenges linked to global macro trends like energy efficiency, clean energy generation, safety and security, globalization and customer productivity. We are building a world that?s safer and more secure, more comfortable and energy efficient, more innovative and productive. For more information, please visit Honeywell.com or follow us @HoneywellNow. Performance Materials and Technologies is a high-performing, global business with an array of technologies that are changing the world for the better. We develop and manufacture advanced materials and process technologies used in a wide range of industries and applications, from petroleum refining to environmentally-friendlier refrigerants to bullet-resistant vests . Our advanced materials are critical in the manufacture of products ranging from nylon to computer chips to pharmaceutical packaging . Performance Materials and Technologies holds more than 3,900 patents globally and employs 2,800 engineers (about one-third of its total workforce) and 1,100 R&D personnel, including 400 with doctorates. Performance Materials and Technologies comprises five businesses, each of which succeeds on the strength of its technology portfolio, complimented with expertise in engineering, sales, marketing and supply chain. Honeywell located in Frankford, PA has an opening for a Industrial Maintenance Mechanic . This role works four (4) ten (10) hour shifts. This role also requires working in adverse weather conditions (cold, hot, humid, rain, snow etc.) Responsibilities : Maintaining, repairing and overhauling manufacturing equipment Performing preventative and scheduled maintenance Performing troubleshooting and equipment repair Responsible for the safe and proper management and handling hazardous and non-hazardous waste in compliance with plant requirements Performing physical work associated with job Other work will be assigned as needed...

CEI Senior Bridge Inspector

The CEI Senior Bridge Inspector performs quality assurance assessments to ensure that construction matches the contracted services. The CEI Senior Bridge Inspector may lead a team of inspectors on large projects. Under the supervision and direction of the CEI Senior Project Engineer or CEI Project Administrator/Project Engineer, the duties of this position include verifying construction and completing work in accordance with the construction Contract documents. The CEI Senior Bridge Inspector provides surveillance of the Contractor's Quality Control activities at the project site. Duties also include maintaining a daily log of construction and inspection activities and comparing progress reports. This position frequently works with little direct supervision. ESSENTIAL JOB FUNCTIONS: Perform complex technical assignments in field surveying and construction layout. Make and check engineering computations. Observe and document construction work. Conduct field tests. Coordinate activities of CEI Inspectors and CEI Inspector?s Aides. Confer with CEI Project Administrator/CEI Project Engineer to determine project details, such as plan preparation, acceptance testing, and field conditions evaluation. Confer with CEI Project Administrator/CEI Project Engineer to ensure that production and staff problems are resolved. Examine work progress, equipment, and construction sites to compare actual activities to specifications. Estimate job requirements. Provide advice on technical construction matters to client, Contractor, CEI Inspectors, and CEI Project Administrator/Project Engineer. Plan and conduct field surveys to detail project sites and confirm existing conditions. Perform quality assurance assessments - assessing the actual to contracted service, materials, and construction. Act as a liaison between Company staff, client, and Contractors. Inspect, sample, and test materials entering into the work in accordance with the plans, specifications, and special provisions for the construction Contract to determine that projects are constructed in reasonable conformity with such documents. Meet deadlines. Communicate with Company staff frequently using email and telephone. Complete a detailed daily log of construction and inspection activities.\ Maintain a safe work environment....

Find More Career Listings

Are you looking for a career in a different field? You can select from one of the following preselected career lists or conduct your own career search below:

Career Search


(e.g. 'Portland, ME' or 'London')

Employers Post Your Job Openings with CareerBuilder

Are you trying to reach highly qualified professionals? List your job openings at CareerBuilder.

Careers in the United States

Citing this page

If you need to cite this page, you can copy this text: